Pdlewis
|
| posted on 26/3/08 at 05:22 PM |
|
|
Look what just arrived.....
 
Garage 1
 
Garage 2
Does anyone know what nuts bolts etc are needed for the wishbones? I assumed they would all come with it but was wrong so need to go shopping and cant
do anything to it which is annoying  Its all good Chris (ZXRlocost) is on it for me!! 
If you are in the Midlands i fully recommend Chris's service
[Edited on 26/3/08 by Pdlewis]
|
|
|
|
|
omega0684
|
| posted on 26/3/08 at 05:24 PM |
|
|
I LOVE THAT NOSE CONE!!!!!!!!!!
OH OH......... AND LET THE FUN BEGIN!!!!!!!!
[Edited on 26/3/08 by omega0684]
I love Pinto's, even if i did get mine from P&O!
|
|
|
MikeR
|
| posted on 26/3/08 at 05:32 PM |
|
|
if your going nut & bolt shopping i'd reconmend a place behind B&Q warehouse in coventry.
(this is about to be a really useful post as i can't remember hte name of hte place for the life of me).
They used to be the nut and bolt supplier for Caterham and are nice blokes to talk to (unless they're really busy).
do a search in yell and they should come up.
|
|
|
dave-69isit
|
| posted on 26/3/08 at 05:35 PM |
|
|
mnr
dont forget zxrlocost he is the local man for mnr
|
|
|
BenB
|
| posted on 26/3/08 at 05:36 PM |
|
|
I like the colour-coordinated hi-viz jacket 
|
|
|
worX
|
| posted on 26/3/08 at 05:38 PM |
|
|
Why haven't they come with the kit?
Which Wishbones/kit type are they?
Stevequote:
Originally posted by Pdlewis
Does anyone know what nuts bolts etc are needed for the wishbones? I assumed they would all come with it but was wrong so need to go shopping and cant
do anything to it which is annoying
|
|
|
Krismc
|
| posted on 26/3/08 at 05:45 PM |
|
|
Every thing came with my kit, unless you didnt buy the comprehensive kit!! they are m17's for most if i remember rightly!! althought they are
probably UNF
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
MikeR
|
| posted on 26/3/08 at 05:46 PM |
|
|
found them,
Brocol Ltd
Unit 58, Binley Ind Est, Hotchkiss Way, Coventry, West Midlands CV3 2RL
Tel: 024 7644 1303
also discovered there are lots of places in Coventry! Anyway, been happy with the service they've (brocol) supplied me with in the past.
|
|
|
welderman
|
| posted on 26/3/08 at 05:46 PM |
|
|
oh yes the fun starts now, bet your a little bit treeeeeed off that there are no bolts, could have had a rolling chassie today.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Pdlewis
|
| posted on 26/3/08 at 05:46 PM |
|
|
Its the inboard, Its not the full kit its currently:
Front and rear wishbone and push rods
Rear Uprights
Front ali uprights
pedal box and m/cs
Fuel line
Brake line
Cheers Mike I will look them up
[Edited on 26/3/08 by Pdlewis]
|
|
|
TimC
|
| posted on 26/3/08 at 06:31 PM |
|
|
quote:
Originally posted by Pdlewis
Its the inboard, Its not the full kit its currently:
Front and rear wishbone and push rods
Rear Uprights
Front ali uprights
pedal box and m/cs
Fuel line
Brake line
I think in retrospect i would have been better going up and buying direct from MNR instead of buying through Chris (zxrlocost)
I hope that was considerably cheaper than MNR's starter kit then, because there's a lot of bolts on this kit list (as well as a load of
other bits!)
[Edited on 26/3/08 by TimC]
|
|
|
ReMan
|
| posted on 26/3/08 at 07:34 PM |
|
|
I found Go-Fixings in Hinckley helpful and reasonable priced with good stock availability or next5 day to order.
Good luck with the build, hope to see you round very soon
|
|
|
LBMEFM
|
| posted on 26/3/08 at 07:40 PM |
|
|
I hope you will be very happy together.:
|
|
|
westf27
|
| posted on 26/3/08 at 08:37 PM |
|
|
can you get hot cross buns in those slots.......no, looks nice
|
|
|
Johneturbo
|
| posted on 26/3/08 at 09:22 PM |
|
|
Don't forget the rosejoint spacers for some of the suspension.
good choice of colour
|
|
|
Agriv8
|
| posted on 26/3/08 at 09:42 PM |
|
|
No Nuts and Bolts- Erm dont think thats right Sure Marc will post up soon.
Oh congrats on the delivery though.
regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
stuart_g
|
| posted on 26/3/08 at 09:44 PM |
|
|
I think you'll be better of getting them from MNR that way you will get the complete set including the spacers as mentioned above, going to be
hard to get these from anywhere else. Don't know what deal you did with them but they are usually included in the kit.
[Edited on 26/3/08 by stuart_g]
|
|
|
marc n
|
| posted on 26/3/08 at 10:08 PM |
|
|
think the kit came through chris darby ( bec owners ) as that is the only kit that has left us today,
If that is the case the std kit spec sheet was marked no nuts and bolts + a few other things
hope that clears up the confusion
cheers
marc
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
bobs bangers
|
| posted on 26/3/08 at 11:47 PM |
|
|
Good luck !!
My mnr kit arrived 2 weeks ago today ! We are almost at the rolling chassis stage and just waiting on some more nuts and bolts and the body tub will
be on. I hasten to add that this has not been worked on flat out as we have been waiting for some fiddly parts that really hampered us when we should
have got cracked on at easter. Chris and Marc have been very helpful so far ! We are starting the electrics next week. We are really impressed with
the kit though and quality of chasssis.
Happy mnr'ing !
Bob
|
|
|
Pdlewis
|
| posted on 27/3/08 at 08:18 AM |
|
|
Cheers Guys
Im a happy chap as you said bob the chassie is fantastic the welds are stunning marc really nice bit of kit.
Can i get a list of the stuff i need off you marc?
|
|
|
marc n
|
| posted on 27/3/08 at 09:41 AM |
|
|
glad you are pleased with everything
yep just send us a list through via email
cheers
marc
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
