Board logo

zx9r needles
larrythelathe - 23/6/08 at 08:08 PM

any idea were i can find some?
its a c series carb.

Wadders - 23/6/08 at 08:24 PM

If you buy a dynojet kit, you get new needles with the kit.


Al.


]Originally posted by larrythelathe
any idea were i can find some?
its a c series carb.

larrythelathe - 23/6/08 at 08:42 PM

i have a kit fitted however i stripped down the carbs today and found one needle badley bent.
I didn't build em!!!!!!!!!

givemethebighammer - 23/6/08 at 09:47 PM

here maybe

http://www.allensperformance.co.uk/data-keihin%20jet%20needles.html

larrythelathe - 24/6/08 at 07:45 AM

the ones i am after after are straight with no grooves

mackei23b - 24/6/08 at 08:14 AM

If they have no grooves, there not dynojet needles, sounds like stock ones to me.

quote:
Originally posted by larrythelathe
the ones i am after after are straight with no grooves

larrythelathe - 24/6/08 at 09:38 AM

Things are becoming clearer.
I have a receipt thats says cjk 001 tts kitcar jetting kit this would seem to be the main jets.

I am going to order some needles from TTS
what number grooves are you guys on for a starting point so i can drive it to the dyno?

mackei23b - 24/6/08 at 10:52 AM

I used the standard set up from Dynojet (4th groove from the top, you can get the set up from

http://www.dynojet.com/pdf/2185.pdf

Cheers

Ian

quote:
Originally posted by larrythelathe
Things are becoming clearer.
I have a receipt thats says cjk 001 tts kitcar jetting kit this would seem to be the main jets.

I am going to order some needles from TTS
what number grooves are you guys on for a starting point so i can drive it to the dyno?