Hi all

After buying Andy Reeve's haynes roadster i know have a bucket load of gear to sell. So the first lot is as follows.

Twin dellorto DHLA40 carbs mounted on a caterham short xflow manifold. I also fitted brand new short trumpets and new k&n filters however the filter tops have got a little marked while in storage. These were briefly on my 1660cc crossflow and they ran fine however i believe they were jetted for a 1700cc, although the best bet would be to have them on a rolling road for fine tuning. All gaskets and diaphragms were changed when i got them. Asking £350.00 posted ono

Weber DGAV32 twin choke carb mounted on a standard xflow manifold complete with a k&n filter, filter case has a few marks from storage. Again, I replaced all the gaskets etc. Asking £70.00 posted ono.

Brand new polo rad never fitted plus brand new 10" push/pull fan and fitting kit. Asking £40.00 posted ono.

Pair of 53/4" classic headlamp unit in black satin (E10 marked) Slight marks on the back but all in all very good condition Asking £60 posted ono.

Brand new 0.750" Master cylinder kit c/w two interchangeable reservoirs suitable for remote fixing if required, also IVA ok float switch cap and all fittings. Asking £30 posted ono.


I'm open to offers on these guys, if they don't sell I'll be banging them on the bay of e. I've also got a bucket load of other stuff including a 2.0 zetec, good spec crossflow engine package and gearbox, type 9 box, sierra donor parts, ron champion chassis, body work, seats and a stack more. I'll post info on the other stuff asap but if there is anything you may need then give me a shout.

Just noticed that we still appear to have a problem with images and the ott locost builder logo! so if you would like some pics then please u2u me with an email address and I'll forward some pics onto you.

Thanks for Looking

Cheers
Leon


Description

Description

Description

Description

Description

Description

Description

Description

Description

Hi Leon

I'll take the rad and fan please, I only live just up at Thirsk so could collect if you're in York?

Ps You don't have a diff by anychance do you?

Hi Marco

Great stuff. I do have a sierra diff with push in shafts, not sure what the ratio is though to be honest but if you wanted to bob down to York then by all means we can take the cover plate of and have a butchers. All this stuff is at my Unit on Hessay Industrial estate (Just off the A59 so not quite in York)

Cheers
Leon

I'll take the master cylinder and the rad if ^ changes his mind

Cheers
Pete

No probs Pete

Cheers
Leon

quote:

---

Originally posted by leon51274
Hi Marco

Great stuff. I do have a sierra diff with push in shafts, not sure what the ratio is though to be honest but if you wanted to bob down to York then by all means we can take the cover plate of and have a butchers. All this stuff is at my Unit on Hessay Industrial estate (Just off the A59 so not quite in York)

Cheers
Leon

---

Hi leon,
I may be interested in the type 9 gearbox, u2u me with your thoughts on price.
I am based in Selby so no probs with pickup.
Regards, Denis.

Just managed to look at the image full size, can the master cylinder operate both the front and rear brakes with seperate circuits? Or is it one designed to go with another and one of those bias bars? Will it be IVA acceptable by itself?

you have u2u

Rad and fan gone
Master cylinder gone

Bump on the rest guys and girls

Intrested in the lights, can you post a pic on here of them? I have lhd lights and only want to swap the lens If there the same as mine

I'm localish too so could collect

u2u sent

Headlights gone. Carbs now on ebay. Bucket load of other stuff to get rid of guys so if you need anything give me a shout, I'll list the other stuff next week.