Board logo

End of build clearout
mick10 - 15/9/14 at 12:12 PM

Hi just a few thing's to get shut off here open to offers on most will post the small stuff

silicone hose lengths
blue 23 inches long 8 mm internal bore
blue 32 inches long 8 mm internal bore
black 31 inches long 12 mm internal bore

£12.00 inc post


Hose clamps think they were stainless but not certain
£7.00 inc post


25 metres of cale sleeving 3mm diameter
£10.00 posted


cycle wings red length 30inch width 8 inches some minor damage but nothing couldn't be fixed in a few hours £5.00


same again 30 inches long brand new in white just needs a clean up £5.00


collection only

cycle wing mould been used and makes good wings just a bit dusty £20.00

collection only

Nosecone mould used to make my own nosecone successfully all return flanges with it could do with a bit of strengthening but will still produce a nosecone no worries
24.5 inches at the widest point and 25 inches in length £50.00


collection only

good strong bonnet mould reinforced at back with wood all flanges with it they could be better strengthened but have made quite a few bonnets with this no problem at all 37 inches at widest point and 26 inches at smallest and 37 inches long £50.00


robinhoodman - 28/9/14 at 11:39 AM

U2U sent regarding cycle wings and mould


mick10 - 28/9/14 at 05:13 PM

Replied to U2U thanks


IanSouthLincs - 28/9/14 at 07:26 PM

u2u sent re. cycle wings