Board logo

Gen. MK Indy nose cone & engine mounts
cps13 - 21/4/13 at 05:30 PM

As per my recent thread having issues with the engine fitment. Does anybody have a nose cone bought from MK Indy, in any condition which I could buy to just check its not my nose cone causing the problem.

also if anyone has any zetec engine mounts for MK indy would be helpful.

Ta

[Edited on 21/4/13 by cps13]

austin man - 21/4/13 at 10:17 PM

what problem are you having with the zetec install? the noescone sits very closw to the timing belt cover if thats your problem you may have to trim a little from the nosecone

cps13 - 21/4/13 at 11:04 PM

quote:
Originally posted by austin man
what problem are you having with the zetec install? the noescone sits very closw to the timing belt cover if thats your problem you may have to trim a little from the nosecone


I would need to trim off about 6 inches towards the front of te car. Looking at people's pics of Indy builds their nose cones seem to be wider at the bottom and more angled at the top. I bought a locost one on eBay which I'm wondering if it's the same width but different heights/angles.

I think a bonnet bulge would solve the clearance issue there but not completely.