Anyone know what the size of these injectors are? Engine is from a 1996 ford fiesta and is 1250 cc?

Also are they high or low impedance injectors?

Cheers & thanks

I don't know the flow rates unfortunately, but mine measure about 11 ohms each, so they're low impedance.

Good little engines by the way!

Ed.

are they the side fed ones, if so what colour? the brown 97MF-BA 1.4 fiesta ment to have a flow rate of 135cc/min so 1.25 would say this or less, also 15.7 ohm which i think is high impedance

[Edited on 5/11/10 by will121]

At 11 ohms they are high (z) you would be measuring 2~4 ohms for low Z

anyone know what other injectors will fit in place of the stock ones

are they side fed ones like this?





if so and can measure them i will check they are the same as 1600Si ones if so these should fit as replacements
RS1800 XR2i
Part number - Bosch 0280155503
Flow rate - c190cc/min at 3bar

Mondeo 2litre
Part number - Ford 948F-B2B (beige)
Flow rate - c225cc/min at 3bar

RS2000
Part number - Bosch 0280155504
Flow rate - c250cc/min at 3bar

1600 Zetec
Part number - Ford 948F-AB / 948F-A2A (black) / 567 31 2471
Flow rate - c150cc/min at 3bar

no not side feed, ill get a pic of them up

They are not side fed, I'll get a photo sorted out & posted.

Thanks for the info everyone

Does anyone have reference to a haynes ford fiesta manual 1995-2002? I'm guessing that such info could be found in there... am I right?

thanks saves me getting a pic, i need some injectors that will flow enough for 300bhp