Hi,

Im in the middle of fitting my saturn bodywork, to my haynes roadster, im at the rear arch stage.
Ive mocked them up but i cant seem to get them centred to the wheel.
Ive ligned the bottoms of the arches with the sides but i seem to have a big gap in front of the wheel and almost touching at the back.

Can anyone give me some help please?

Ive included some photos, which shows the problems, they are the last photos in my album.
The tape is for aerodynamics


thanks Mike

https://picasaweb.google.com/108492714415649762152/HaynesRoadsterNissanTurboPower?feat=directlink

Edit/Delete Message

[Edited on 22/6/11 by vtecmike]

none of the links work?

ive put up the link to my whole album, it might work better!



thanks Mike

https://lh6.googleusercontent.com/-oeGIVKhOkMo/TgJDSOInc0I/AAAAAAAAAeE/DUObdq0u0UQ/s640/seven8%252520012.JPG

That looks ok to me

[Edited on 22/6/11 by jacko]

do you think ? it just doesnt seem very centered, ive been trying to find some pictures on the forum but havent found any that i can really see the arches clearly.

thanks Mike

Im at that stage with mine and its about the same. Same colour body work as well, I thought I was the only one lol. Check out the Caterham superlights, you could park the titanic in the gap, I was very suprised.

Photo 86 of 90 looks ok to me. Could be a bit more centred but you could also end up chasing your tail...

Put the front of the wing level with the bottom of the side panel, it looks wrong that high up.

well, i think i will just have to go with it!


thanks for the help



mike