[Edited on 9/6/15 by Rich J]
After some recent overheating issues I have to replace the head gasket, and I thought that I might as well get check the head and if necessary get it
skimmed. So can anyone recommend a place to get the head skimmed around the Bracknell/Reading area?
cheers
Craig
These guys modified a head for me some years ago but also do general engine
machining work - well pleased with the results
[Edited on 9/6/15 by Rich J]
Roe Engineering
Fleet
01252 613404
Had loads of heads and blocks rebored by them in the past
Speak to Iain Rowley at Delta Motorsport. First class......
http://www.deltamotorsport.co.uk/
quote:
Originally posted by Rich J
These guys modified a head for me some years ago but also do general engine machining work - well pleased with the results
[Edited on 9/6/15 by Rich J]
Poor Experience with Clifford Cox; no idea if it's the same people running CFM but they have the same address and Phone Number...
Poor Experience with Clifford Cox; no idea if it's the same people running CFM but they have the same address and Phone Number...
As Gaz_Gaz said,
Roe Engineering
Fleet
Very helpful - old school.
quote:
Originally posted by gaz_gaz
Roe Engineering
Fleet
01252 613404
Had loads of heads and blocks rebored by them in the past
