omega0684
|
| posted on 30/8/09 at 07:20 PM |
|
|
Supercharging & Bike Throttle bodies
How would you go about Supercharging an engine on Bike Throttle bodies? obviously you would need supercharger, intercooler, plenum etc, but would the
throttle boddies need any special modification etc?
|
|
|
|
|
jpindy3
|
| posted on 30/8/09 at 07:48 PM |
|
|
i shouldnt think they would,so long no boost can leak out.
|
|
|
BenB
|
| posted on 30/8/09 at 07:48 PM |
|
|
Depends how much boost you're planning on going for. Lots of TBs will take a little boost but most will leak if you go for big PSI.
I've gone for a single RS Turbo TB (ie something designed to take boost)....
|
|
|
imp paul
|
| posted on 30/8/09 at 07:49 PM |
|
|
my pals got a tts charger on his zx14r running 6 psi only mods are block spacer that's it works fine 
|
|
|
blakep82
|
| posted on 30/8/09 at 07:58 PM |
|
|
i've always wondered how difficult it would be to enclose all the TBs (maybe easier with carbs) in a ali airbox which is all underpressure with
filtered air inside, so the pressure is the same inside and outside the carbs
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
mark chandler
|
| posted on 30/8/09 at 08:23 PM |
|
|
The only air leak that I have noticed is on the idle bypass on my 954 blade TB's, beyond that its a straight tube with butterflies and injectors
pointing in.
The idle bleeds air from around the mouth of the trumpets, I just use the butterflies to regulate idle now when warm, cut off the cold idle bit that
was a stat thing.
Regards Mark
|
|
|
jpindy3
|
| posted on 30/8/09 at 08:53 PM |
|
|
i half made a plenum for my zx9r carbs,
i was having trubble trying to get it air tight around the trumpets.
if you can weld have a go at making a plenum with a single tb
|
|
|
r1bob
|
| posted on 30/8/09 at 09:36 PM |
|
|
You need to get in touch with ,, swalf3,, a member on here, he's got a Cateram R1 super charged, he would put you in the right ball park!!
using a rotrex and a bit of fabrication done it for a reasonable budget!! must get in touch with him and go and see it for my self.
|
|
|
.JPG)
