bodger
|
posted on 3/2/10 at 09:13 PM |
|
|
Dash on the MK website gallery, any info ?
Spotted this smart looking Dash today on MK's site. Does anyone know who's it is, where it came from ? Is that a standard set of bike clocks
?
![](/galpreviews/MK_GAL_dash.jpg) ![MK Gallery Dash](/gallery/MK_GAL_dash.jpg) MK Gallery Dash
|
|
|
scootz
|
posted on 3/2/10 at 09:17 PM |
|
|
Dunno... but WTF is going on in your avatar?
It's Evolution Baby!
|
|
McLannahan
|
posted on 3/2/10 at 09:19 PM |
|
|
Hayabusa clocks I believe!
|
|
eddie99
|
posted on 3/2/10 at 09:20 PM |
|
|
Certain that they are a standard set of bike clocks, seem them before just not sure which bike they're from.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
McLannahan
|
posted on 3/2/10 at 09:21 PM |
|
|
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280458809697
|
|
cosmick
|
posted on 3/2/10 at 09:32 PM |
|
|
Yes that is definately a Hayabusa set of clocks and my dashboard has the same set of clocks.
See my photo archive to show the original dash and the new Hayabusa one. I think I know which one I prefer and it has all the functions working. ie FI
light plus Oil Pressure, Fuel Gauge,Temp Gauge, Indicators, Main Beam, Neutral, Fuel Consumption, Clock, Trip and all in one nice shape.
|
|
PAUL FISHER
|
posted on 3/2/10 at 09:51 PM |
|
|
I think that car belongs to "OX" on this forum,might be worth sending him a U2U and ask him.
|
|
TimEllershaw
|
posted on 3/2/10 at 10:04 PM |
|
|
quote: Originally posted by cosmick
Yes that is definately a Hayabusa set of clocks and my dashboard has the same set of clocks.
See my photo archive to show the original dash and the new Hayabusa one. I think I know which one I prefer and it has all the functions working. ie FI
light plus Oil Pressure, Fuel Gauge,Temp Gauge, Indicators, Main Beam, Neutral, Fuel Consumption, Clock, Trip and all in one nice shape.
Did you have any issues wiring it up or calibrating the speedo ?
|
|
Simon
|
posted on 3/2/10 at 10:18 PM |
|
|
May be speaking out of turn as I've not done a bec yet, but if you use the complete loom, just extend for lights etc as required (maybe use a
relay for h/lights), the only prob would be the speedo and I do believe the "speedo healer" fixes that by delaying/speeding up speedo
input pulses.
Stand to be corrected, of course
ATB
Simon
|
|
Blue Devil
|
posted on 4/2/10 at 01:13 AM |
|
|
quote: Originally posted by Simon
May be speaking out of turn as I've not done a bec yet, but if you use the complete loom, just extend for lights etc as required (maybe use a
relay for h/lights), the only prob would be the speedo and I do believe the "speedo healer" fixes that by delaying/speeding up speedo
input pulses.
Stand to be corrected, of course
ATB
Simon
It would take much much more length to "delay" the pulses. As long as there is no resistance in the wires, the speedo will read perfectly
fine when the loom is extended.
The speedohealer is a plug in box that allows user input of the final gearing (output sprocket to tires) so that the speedometer reads correctly. This
can be used for us when we use a shorter or taller tire, or change the final gearing from the stock.
Mid Engine R1 build
http://www.locostusa.com/forums/viewtopic.php?f=36&t=4970&start=0
|
|
Nash
|
posted on 4/2/10 at 06:06 AM |
|
|
So am I right in thinking this dash could be used on a CEC.
If so how much effort to wire in and set up?
.......Neil
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
franky
|
posted on 4/2/10 at 07:02 AM |
|
|
why would you unless your car rev's up to 11-12000 RPM?
|
|
cosmick
|
posted on 4/2/10 at 09:05 AM |
|
|
quote: Originally posted by TimEllershaw
quote: Originally posted by cosmick
Yes that is definately a Hayabusa set of clocks and my dashboard has the same set of clocks.
See my photo archive to show the original dash and the new Hayabusa one. I think I know which one I prefer and it has all the functions working. ie FI
light plus Oil Pressure, Fuel Gauge,Temp Gauge, Indicators, Main Beam, Neutral, Fuel Consumption, Clock, Trip and all in one nice shape.
Did you have any issues wiring it up or calibrating the speedo ?
My main issues were converting the Hayabusa harness back to the standard clocks as Westfield ( who built the car) had cut several wires out of the
harness and were missing. they had also connected the Air Box tmeperature sender to the engine and visa versa. so my engine was always running rich as
it thought that the engine was only running at 20degrees and the airbox was at 80. Good job i found that when i sorted the harness out.
As for the speedo calibration, I can thoroughly recommend the Speedo Healer made by Heal Tec. it is so simple to install and very small in size. you
can recalculate your gearing scientifically or just adjust the speed using a GPS. It is totally adjustable Up or Down in speed. My one is very
accurate according to other speed comparisons.
|
|
bodger
|
posted on 4/2/10 at 04:19 PM |
|
|
quote: Originally posted by scootz
Dunno... but WTF is going on in your avatar?
Yes it's OK for about 10 secs then gets annoying, need to change it for some quality porn - suggestions please, err on second thoughts forget
that ![](/images//smilies/wink.gif)
|
|
Simon
|
posted on 4/2/10 at 08:04 PM |
|
|
quote: Originally posted by Blue Devil
It would take much much more length to "delay" the pulses.
I think you misunderstand me.
Speedo decides how fast you are going by counting input pulses (from for eg a magnet or magnets on driveshafts or abs rings whatever (I have one
magnet on my pushbike and four on toy car). To give an adjusted reading those pulses will be speeded up/slowed down by the speedo healer to fool
speedo.
I was talking about extending the loom so bike wiring would reach the lights. Nothing too technical
ATB
Simon
|
|
Nash
|
posted on 4/2/10 at 08:59 PM |
|
|
quote: Originally posted by franky
why would you unless your car rev's up to 11-12000 RPM?
I have a 4 AGE that will be reving to 8500 so I'll paint the red line further down the scale
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
Simon
|
posted on 4/2/10 at 11:56 PM |
|
|
Get more cylinders/cc and you won't need to thrash it
ATB
Simon
|
|