scootz
|
posted on 30/4/10 at 01:01 PM |
|
|
Removing Duratec Head...
... when my MX5 (1.8 MZR) engine arrived, I noticed that the exhaust ports had not been bunged up, so I'm going to take the head off just to be
sure that no crap has got in there.
Any 'musts' whilst I'm at it? Is the Duratec head particularly responsive to porting and polishing, or will it be a case of minor
gain for a fair bit of effort? VVT... worth keeping, or should I disable it? Etc...
Cheers!
It's Evolution Baby!
|
|
|
Tim 45
|
posted on 30/4/10 at 01:23 PM |
|
|
As far as I'm aware, the ports are very good as standard and it would be a case of a lot of effort for minor gains.
If you're unsure, then you may as well go for it now, whilst the heads off and theres no faffing around at a later date. But is it a necessity?
No, probably not.
|
|
scootz
|
posted on 30/4/10 at 01:26 PM |
|
|
Cheers Tim!
It's Evolution Baby!
|
|
Dusty
|
posted on 30/4/10 at 01:42 PM |
|
|
Might be easier and cheaper and quicker to buy one of those 'peep down little hole camera thingies' from Maplins to look down the plug
holes.
|
|
scootz
|
posted on 30/4/10 at 01:48 PM |
|
|
One of these linky...???
Could be just the very thing... thanks for the heads-up! Off to find out where it's made... if it's China, then it's a no-no!
[Edited on 30/4/10 by scootz]
It's Evolution Baby!
|
|
snapper
|
posted on 30/4/10 at 01:53 PM |
|
|
Beware of polishing, it does little except look bling, a bit of rough in the inlet ports is better for stopping the fuel puddling
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
Dusty
|
posted on 30/4/10 at 01:56 PM |
|
|
Sorry, thought I saw it sunday in the free ads. Wrong. It was in a promo from Firebox.
Firebox.
Might be chinese but cheaper than your linky.
|
|
scootz
|
posted on 30/4/10 at 02:03 PM |
|
|
Cheers Dusty... the cheapest I could find was THIS one at
£35.
Can I find where they are made??? Does nobody state the country of origin on their products anymore???
It's Evolution Baby!
|
|
big-vee-twin
|
posted on 30/4/10 at 03:18 PM |
|
|
£33 on EBAY including postage
Link didnt work Item No -260582579400
[Edited on 30/4/10 by big-vee-twin]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|