kj
|
posted on 17/9/11 at 04:11 PM |
|
|
Bits for sale
A few bits for sale, some pics in my archive others to follow.
Aeroscreen double bubble type with hole for centre mirror £20.00 + p&P sold
Rear wings £20.00 +p&p
front wings £10.00 +p&p need minor repair
rear lights land rover type red and orange £10.00 +p&p
front bike indicators £5.00 + p&p
bike mirrors can't remember the model £10.00+ p&P
centre mirror race tec £20.00 +p&p sold
nose cone extended toward the bonnet can be cut back £15.00 + p&p
low back caterham seats £60.00 +p &p
or collect hole saw set never used cost £40.00 will take £20.00 + p&p
4 alloys 13" with 205/60/13 tyres almost new + spare tyre £120.00 +P&P sold
cycle wing stays home made for cortina hubs £10.00 + p&p
Acewel digi dash fitted and will be removed £25.00 +p&P SOLD
I have a ali bonnet with some cracks offers
head lights originally westfields good condition all working £40.00 + p&p.
Head gasket set open not sure if any small bits are lost, this is for a 1.6 £5.00 _p& p
timing belt for 1.6 pinto £5.00 inc postage.
coil overs non adjustable type very firm from the rear of my car need a tidy up £10.00 p&p
I travel about a bit so may be able to drop off
More may come
[Edited on 18/9/11 by kj]
All pics in archive under for sale
[Edited on 18/9/11 by kj]
[Edited on 18/9/11 by kj]
[Edited on 18/9/11 by kj]
[Edited on 19/9/11 by kj]
Think about it, think about it again and then do it.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
adrianreeve
|
posted on 17/9/11 at 05:29 PM |
|
|
I'm interested in the bike indicators subject to a photo please?! Are they in good nick?
Cheers
Adrian
|
|
omega0684
|
posted on 17/9/11 at 07:20 PM |
|
|
what PCD are the alloys? make of tyres etc?
I love Pinto's, even if i did get mine from P&O!
|
|
daniel mason
|
posted on 17/9/11 at 07:55 PM |
|
|
Interested in bike mirrors and cater ham seats if you could post a picture! Thanks
|
|
ChrisLeary
|
posted on 17/9/11 at 08:37 PM |
|
|
What size are the rear wings? Width and a rough diameter please.
Thanks, Chris.
|
|
JohnH
|
posted on 17/9/11 at 09:20 PM |
|
|
Cycle wing stays
Mite be intrested in the cycle wing stay,do you have a pic ? Dont need postage as I am in the toon every monday and wednesday night. John
|
|
slingshot2000
|
posted on 17/9/11 at 10:12 PM |
|
|
Can I have second dibs on the cycle wing brackets if John does not take them please?
Again, postage would not be required as I am only in Durham and could collect at short notice.
Regards
Jon
|
|
kj
|
posted on 18/9/11 at 06:45 AM |
|
|
Hi
Seat pics in archive, the rear wheel arches are 9 and half inch wide.
Cycle wing stays seam a bit flimsey could do with the tops beefing up a bit will get pics later.
Wheels are originally of a 2.8 injection capri.
Think about it, think about it again and then do it.
|
|
ChrisLeary
|
posted on 18/9/11 at 07:17 AM |
|
|
I'll have a quick measure of what width rear arches i need tonight when i get home and I'll let you know.
Thanks again, Chris.
|
|
ss1turbo
|
posted on 18/9/11 at 07:29 AM |
|
|
Does the Acewell come with the speed sensor? If so, yes please....
Long live RWD...
|
|
kj
|
posted on 18/9/11 at 07:31 AM |
|
|
yes it has speed sensor, one of the wires had to be extended but works fine, its the basic unit no temp gauge or warning lights
Think about it, think about it again and then do it.
|
|
kj
|
posted on 18/9/11 at 02:32 PM |
|
|
wing stays in archive now.
Think about it, think about it again and then do it.
|
|
ChrisLeary
|
posted on 18/9/11 at 03:49 PM |
|
|
any chance of a picture of the rear arches please? Also, what holes are in them?(for lights)
Cheers, Chris.
|
|
JAMSTER
|
posted on 18/9/11 at 04:40 PM |
|
|
wheels
u2u wheels thanks
|
|
kj
|
posted on 18/9/11 at 05:15 PM |
|
|
u2u back jamster.
Think about it, think about it again and then do it.
|
|
JAMSTER
|
posted on 18/9/11 at 06:47 PM |
|
|
wheels
u2u wheels
|
|
johnay
|
posted on 19/9/11 at 01:37 PM |
|
|
Hole saw set
U2U sent
|
|
kj
|
posted on 19/9/11 at 01:51 PM |
|
|
u2u's up to date.
Think about it, think about it again and then do it.
|
|
ChrisLeary
|
posted on 20/9/11 at 06:31 AM |
|
|
Kj, sorry to let you down, the rear arches are too narrow.
Cheers, Chris.
|
|
kj
|
posted on 20/9/11 at 12:36 PM |
|
|
No probs.
Think about it, think about it again and then do it.
|
|
Confused but excited.
|
posted on 20/9/11 at 02:08 PM |
|
|
U2U sent re; front & rear wings.
Tell them about the bent treacle edges!
|
|
kj
|
posted on 20/9/11 at 03:15 PM |
|
|
u2u sent,
Think about it, think about it again and then do it.
|
|
Confused but excited.
|
posted on 20/9/11 at 04:51 PM |
|
|
Replied to. Wings now mine, all mine. :-)
Tell them about the bent treacle edges!
|
|
lotos
|
posted on 20/9/11 at 05:09 PM |
|
|
u2u sent regarding the cycle wing stays.
|
|
kj
|
posted on 20/9/11 at 05:58 PM |
|
|
Up date,
wings both front with wing stays and rears gone now.
Think about it, think about it again and then do it.
|
|