mick10
|
posted on 27/9/11 at 09:18 PM |
|
|
M18 Threaded rod
Anyone know where i can get hold of a length of M18 x 1.5 threaded rod please, need about 40cm length but would buy more if needed
Cheers
|
|
|
big-vee-twin
|
posted on 27/9/11 at 09:23 PM |
|
|
ebay PACK OF 1, M18 THREADED BAR / ROD - 1 METRE LENGTH | eBay
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
mick10
|
posted on 27/9/11 at 09:33 PM |
|
|
sorry i have seen them i wanted the M18 x 1.5 threaded rod the same as the transit drag links for some suspension alterations i am doing at work with
some students it seems almost impossible to find
|
|
Myke 2463
|
posted on 27/9/11 at 09:44 PM |
|
|
InStock Fasteners
50 Lake Blvd., Ste. 656
Kadish Center
Buffalo Grove, IL 60089 USA
http://myfastener.com/SearchResultsxhtmlsubcategoryid~120/criteria~9%7C476%7C/mea~2/plnk~1/search~2
9080037634
Threaded Rods -Standard
M18 X 1.5MM pitch X 1 Meter DIN 975 A193 - B7 PLAIN
from $81.76140 /piece
Fancy a ride out
[Edited on 27/9/11 by Myke 2463]
Be Lucky Mike.
|
|
mick10
|
posted on 27/9/11 at 10:08 PM |
|
|
think i wiull have to have a rethink here lol thanks anyway for the help
|
|
40inches
|
posted on 28/9/11 at 08:29 AM |
|
|
Can get it from here. About halfway down the page.
They do it in mild steel and 8.8 grade.
|
|
HowardB
|
posted on 28/9/11 at 09:41 AM |
|
|
quote: Originally posted by mick10
sorry i have seen them i wanted the M18 x 1.5 threaded rod the same as the transit drag links for some suspension alterations i am doing at work with
some students it seems almost impossible to find
haven't you got a lathe and a thread cutting tip?
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
Fred W B
|
posted on 28/9/11 at 11:06 AM |
|
|
Rolled threads would be prefered to a cut thread in an critical application.
Cheers
Fred W B
You can do it quickly. You can do it cheap. You can do it right. – Pick any two.
|
|
mick10
|
posted on 28/9/11 at 08:38 PM |
|
|
Cheers for all the help guys, i havent access to a lathe so will check out leads from 40 inches cheers
|
|
Alan B
|
posted on 4/10/11 at 10:11 PM |
|
|
Another US source
http://www.mcmaster.com/#standard-threaded-rods/=eckzuq
Not much help but only $43.60 a length...
|
|