piddy
|
| posted on 26/3/12 at 10:34 PM |
|
|
Head gasket for a 1500 GT
Can anyone advice me where I might find a Head gasket is for an Ford pre-cross flow 1500 GT bored out to 1670cc.
we've Tried Burtons
|
|
|
|
|
Paul Turner
|
| posted on 27/3/12 at 08:21 AM |
|
|
X-flow and pre x-flow head gaskets are the same and that includes BDA and twin cam variants. Any gasket to suit a 83.5mm bore will be fine. Thickness
is more important, you need to keep the same compression ratio and valve clearances.
Surprised Burton cannot sort you, here is a link to their gasket page
http://www.burtonpower.com/parts-by-fitment-type/parts-by-engine-ford/ford-pre-cross-flow.html?part_type=625&product_area=745&product_group=24
2 it shows lots of choice of thickness and bore size.
Only difference between a x-flow and pre x-flow are the inlet and exhaust manifold gaskets.
|
|
|
chillis
|
| posted on 27/3/12 at 09:06 AM |
|
|
Have you tried throbnozzle racing?
|
|
|
rusty nuts
|
| posted on 27/3/12 at 07:20 PM |
|
|
Past Parts in Bury st Edmonds may be able to help
|
|
|
.jpg)
