donn006
|
| posted on 19/8/14 at 11:50 PM |
|
|
Raising bonnet
Hi everyone I'm looking for a couple of strips of plastic or alloy to raise my nose cone and my bonnet from the chassis as the bonnet is
touching my cambelt ,I'm looking for about 2x 1.5 metres long and about 30 mm width and 15-18 mm thick I've tried every ware from BBQ
,wicks and even a plastics place but no joy
|
|
|
|
|
Macbeast
|
| posted on 20/8/14 at 05:10 AM |
|
|
Rectangular section plastic electrical cable trunking ?
I'm addicted to brake fluid, but I can stop anytime.
|
|
|
INDY BIRD
|
| posted on 20/8/14 at 05:50 AM |
|
|
No help with the trim but is lowering the engine and Option if only 15mm ? Or is this too much?
Failing that.poss use wood strip to raise it and cover it in 3m di noc carbon effect vynl
Cheers Sean
|
|
|
mcerd1
|
| posted on 20/8/14 at 07:35 AM |
|
|
what about a bonnet scoop - that's what most folk do in this situation
like this one for example:
-
|
|
|
Matt21
|
| posted on 22/8/14 at 12:49 AM |
|
|
could you not use some alu box section?
1"' x 1/2"', 1.1/2"'x 3/4"', 2"' x 1"',Aluminium Rectangular Tube / Box Section
£29 for a 3m length of 1.0" x 0.5"
|
|
|
