Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Cortina Uprights HELP!!
JC

posted on 27/10/14 at 04:16 PM Reply With Quote
Cortina Uprights HELP!!

Further to my post here I investigated more. As the passenger side calliper fitted the drivers side (upside down), and transferring the hubs from side to side still left nothing fitting the passenger side hub, I turned my attention to the upright.

By measuring, spirit level and by eye, I think the spindle is bent upwards - the hub sits out of true in this direction when you mount it and that also makes sense with the (lack of) ability to fit a caliper.

HELP!!!!!

What can be done? - I guess Cortina uprights are rocking horse proverbial to replace and I want to avoid re making the entire front suspension to suit a different component......


[img] Bent?
Bent?
[/img]

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
mds167

posted on 27/10/14 at 04:30 PM Reply With Quote
I'm sure someone of a more mechanical mindset will have a locost solution but if all else fails I believe Rally Design sell uprights of Cortina geometry, £195 a pair.





"No, you can't lick the system; but you can give it a damn good fondling."

View User's Profile View All Posts By User U2U Member
Doctor Derek Doctors

posted on 27/10/14 at 05:10 PM Reply With Quote
That doesn't look very healthy, they are quite often used for stock car racing so perhaps its had a hard life. Cortina uprights pop up quite often on here and ebay so i would just look for another pair.

Be quick:
locost kit car parts





Designer and Supplier of the T89 Designs - Single Seater Locost. Build you own Single Seater Racecar for ~£5k.

Plans and Drawings available, U2U or e-mail for details.

Available Now: The Sports Racer Add-On pack, Build a full bodied Sports Racer for Trackdays, Sprints and Racing.



www.t89.co.uk
www.racecarwings.co.uk

callan@t89.co.uk

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
Mark Allanson

posted on 27/10/14 at 06:19 PM Reply With Quote
I have the drawings for this if you want to measure and check





If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation

View User's Profile Visit User's Homepage View All Posts By User U2U Member
JC

posted on 27/10/14 at 07:52 PM Reply With Quote
Mark, that would be great, thanks!
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
JoelP

posted on 27/10/14 at 08:16 PM Reply With Quote
Ally replacements from raldes.






View User's Profile View All Posts By User U2U Member
JC

posted on 27/10/14 at 08:40 PM Reply With Quote
The Rally Design replacements are nice....but! It says the caliper brackets suit wilwood calipers - I want to stick with the M16s, and secondly, with VAT and delivery they cost more than a 'Ron'!
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
43655

posted on 27/10/14 at 08:48 PM Reply With Quote
i think the geometry is the same as the Wilwood Prospindles?
I have a pair here if you're interested / if it is actually damaged

View User's Profile E-Mail User View All Posts By User U2U Member
JC

posted on 28/10/14 at 08:03 PM Reply With Quote
Is it the pro spindles or the aluminium uprights you have?

On their eBay ad, Raldes say the Ali ones are not compatible with M16 calipers

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
43655

posted on 28/10/14 at 08:57 PM Reply With Quote
the forged steel Wilwood ones
View User's Profile E-Mail User View All Posts By User U2U Member
JC

posted on 29/10/14 at 05:03 PM Reply With Quote
Dimensions of the prospindles here

Not the same as cortina

I measured both uprights today. The good stub axle has a small amount of inclination - 0.3 degrees. The other axle is 1.1 degrees.
When the gap between the caliper mounts and the disk is measures, this results in a difference of 1/8th inch, hence the caliper not fitting.

Time for a 'wanted' posting

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Ugg10

posted on 6/11/14 at 11:41 PM Reply With Quote
Did you get this sorted, this guy has a set for sale http://www.locostbuilders.co.uk/viewthread.php?tid=193367





---------------------------------------------------------------
1968 Ford Anglia 105e, 1.7 Zetec SE, Mk2 Escort Workd Cup front end, 5 link rear
Build Blog - http://Anglia1968.weebly.com

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.