coozer
|
posted on 23/5/15 at 09:28 PM |
|
|
Painting over dark stain?
So err indoors, nowt to do with me in the garage btw, wants all the woodwork doing white...
Its 15 years side we moved here staining all the woodwork a dark oak... Seemed sensible at the time...
Questions is, how easy is it? I'm tempted to get the decorator's in but needing the cash for my turbo engine built, v8 rebuild and
holidays I real want to do it on the cheap...
The woodwork is not varnished just stained and I've been looking at the stuff screwfix sell which says 'stain cover and primer' does
it mean colour stain or dirty old man stains? Non of them here really...
Is it really as simple as a soap wash, rub down and a stain cover primer??
1972 V8 Jago
1980 Z750
|
|
|
austin man
|
posted on 23/5/15 at 10:11 PM |
|
|
few coats of primer then a couple of top coats should sort it
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
joneh
|
posted on 24/5/15 at 06:42 AM |
|
|
Yeah easy. Just make sure you remove any wax too. I scraped an entire wardrobe with a Stanley knife blade, then painted it. Still looks new after 4
years.
|
|
Smoking Frog
|
posted on 24/5/15 at 09:55 AM |
|
|
quote:
Is it really as simple as a soap wash, rub down and a stain cover primer??
More or less, yes as long as there is no reaction between the stain and primer. I would not use water based paint for this job. Primer coat, two
coats of undercoat and gloss. Gloss paint is semi transparent, it's the undercoat that covers well and show's the whiteness. If it looks
patchy apply another undercoat before glossing.
|
|
J-16
|
posted on 24/5/15 at 03:40 PM |
|
|
I would use this primer:
http://www.zinsseruk.com/product/b-i-n/ or Bulls eye 1-2-3
Superb for this type of problem.
|
|
coozer
|
posted on 24/5/15 at 03:55 PM |
|
|
Cheers, yes I was looking at the zinessers range, downloaded the PDF spec and it says for all its products not recommended for woodstain...
But, screwfix have it in so will givce it a go....
1972 V8 Jago
1980 Z750
|
|
Mr C
|
posted on 24/5/15 at 03:56 PM |
|
|
Another for the Zinsser primer, my brother's in the trade and recommended it to me for some recent work I was doing seals and sticks to anything
just give it a very light rub down between coats to knock off any "nibs" Worth paying the extra for.
Girl walks into a bar and asks for a double entendre, so the barman gave her one
|
|
beaver34
|
posted on 24/5/15 at 05:51 PM |
|
|
as above really, we hit ours with two coats of primer and two of top coat looks fine
|
|