Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: What bodywork are you all using?
adrianreeve

posted on 28/4/19 at 08:58 PM Reply With Quote
What bodywork are you all using?

So I built a Haynes Roadster about 5 years ago, when there were a few suppliers around for chassis, bodywork etc. I’m now thinking about starting again, using an MX5 donor. Having done a bit of research, it seems like suppliers are now thin on the ground! I’m happy to build the chassis, wishbones etc, but who are people using for bodywork now? I’d do the sides and rear panel in ali like my last one, but would want wings, scuttle, bonnet and nosecone.

Thanks

Adrian

View User's Profile View All Posts By User U2U Member
voucht
Contributor






Posts 240
Registered 22/5/11
Member Is Offline

Photo Archive Go!
Building: Haynes roadster on the road since november 2014 bu

posted on 29/4/19 at 05:32 AM Reply With Quote
Hi,

Equinox makes a very good quality bodywork for Haynes Roadster. I think I won't be the only one here vouching for them.

http://equinoxproducts.co.uk/product-category/haynes/roadster/?prod uct-page=1

Good luck for the build!





https://vouchtroadster.blogspot.com/
https://cafrazx550.blogspot.com/

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
adrianreeve

posted on 29/4/19 at 06:11 AM Reply With Quote
Great stuff, thanks! Are they new moulds, or taken from the old Saturn ones?

Cheers

Adrian

View User's Profile View All Posts By User U2U Member
Myke 2463

posted on 29/4/19 at 07:25 AM Reply With Quote
New moulds made by themselves and not too far from you, could always go and see them.





Be Lucky Mike.

View User's Profile View All Posts By User U2U Member
jossey

posted on 29/4/19 at 09:58 AM Reply With Quote
Or build one to westfield specs I've seen new bodywork for the wide on Facebook new for 1000 quid.

The Haynes is very similar to westfield wide specs I've been told but never checked





Thanks



David Johnson

Building my tiger avon slowly but surely.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
voucht
Contributor






Posts 240
Registered 22/5/11
Member Is Offline

Photo Archive Go!
Building: Haynes roadster on the road since november 2014 bu

posted on 30/4/19 at 05:24 AM Reply With Quote
quote:
Originally posted by adrianreeve
Great stuff, thanks! Are they new moulds, or taken from the old Saturn ones?

Cheers

Adrian


Yes, they are GRP professional and I'm sure they use moulds in good condition. No connexion with ex-Saturn, you can see that the design is even a bit different (check out the nose cone with oil cooler opening, it looks great. And if, like me, you do not have an oil cooler, this spot is perfect to fit the number plate!)

IIRC Saturn moulds went from hand to hand of non-professional GRP manufacturers. The last guy to have them disappeared after a little while.





https://vouchtroadster.blogspot.com/
https://cafrazx550.blogspot.com/

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Hugh Paterson

posted on 1/12/19 at 10:22 AM Reply With Quote
I still have the mould tools from last 2 we built 9 years ago if U need bits, suitable nose bonnet scuttle and front and rear wings + some mouldings lying on shelf.
View User's Profile E-Mail User View All Posts By User U2U Member
tom225

posted on 1/12/19 at 12:26 PM Reply With Quote
quote:
Originally posted by Hugh Paterson
I still have the mould tools from last 2 we built 9 years ago if U need bits, suitable nose bonnet scuttle and front and rear wings + some mouldings lying on shelf.


May be interested in moulds if your parting with them....

View User's Profile View All Posts By User U2U Member
Hugh Paterson

posted on 1/12/19 at 05:44 PM Reply With Quote
U have a msg Tom
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.