jimhammer
|
posted on 7/5/08 at 04:26 PM |
|
|
cable
Hi,
need a couple of bolts with hole drilled through to retain clutch and throttle cables, solderless nipples not strong enough.
Anyone know if these are available online?
(yeah I know I could make my own, but after the third drill bit I've 'ad enough!)
thanks
jim
|
|
|
cryoman1965
|
posted on 7/5/08 at 04:27 PM |
|
|
There maybe someone on here with a Lathe that could make them for you.
Sorry i dont have one .
N
|
|
02GF74
|
posted on 7/5/08 at 04:47 PM |
|
|
what about soldered nipples then?
clean the cable end, slapy it out, some plumber solder and job done.
VWP sell he cable and nipples - hundreds of thousands of BSAs used this without problem.
but if you insist on drilling bolts - not easy as you have found out, then what about using the cable adjusters? bit more pricey unfortunately.
|
|
smart51
|
posted on 7/5/08 at 05:37 PM |
|
|
You could just drill through a couple of bolts. I have. File a flat on the bolt by the head and mark with a centre punch. Hold the bolt in a vice
and drill.
|
|