Board logo

IVA Pass - Let me tell you a story!
ctwv50 - 18/3/15 at 10:13 PM

IMG_4175[ /url] by [url=https://www.flickr.com/people/93882345@N04/]CTWMX5, on Flickr

Here we go then. On Monday the 16th I went to work in the morning and then discovered I had to leave early as a delivery of young lylandii arrived that needed planting asap. Not ideal having to do gardening just before my test day but I left work at 2pm and got that done and out the way. Next I needed to pick up my wife from work and then the kids from school. We are a one car family so this had to be done before I went off to Bradford to pick up the car transporter. I left at about 3:30pm with my eldest son (11) for company.

The drive was ok it was 80 miles, but most of it was M62. It’s the highest motorway in England so you get a lot of traffic speed variation due to the climbs and descent. I bloody hate it and have driven it lots as I used to go to Leeds Uni and travelled it back and forth a lot by car between there and Liverpool way. Bradford traffic was just gridlock between the M606 and the transporter location, but TomTom got us there at around 5:30pm.


Pali was the owner of the transporter and we quickly did the paperwork and loaded up my car onto the back of it. He showed me the ropes, literally, told me a few do’s and don’ts and we were off back to the motorway. Hire cost was £105 with a £250 excess on the insurance, I also left a deposit of £100 just incase the fuel was low on return.

Return journey was uneventful apart from my son introducing me to KFC at the services. We chatted most the way home in the slow lane doing about 50mph. Everytime we went over a bump my son couldn’t help but keep checking the car was still there. I felt like I was being really badly tailgated by own car. The handbrake on this thing had about 2ft of travel and the gear stick, I noticed, was the perfect replica of horses erect penis!


So home we arrived about 8:00pm I think. Eventually I got it reversed in outside the house on our unusually wide driveway. Unloading went smoothly with an audience of my family out the kitchen window. With the family car now out the way it was time to empty the garage! I had gone through everything I might need or even ,wouldn’t ever possibly need but you never know, and had organised it into boxes. I even took the CO2 fire extinguisher, the original steering wheel from the MX5, my soldering iron, a bottle of butane, literally every tool I had used in building the car apart from the welder. Which I probably would of took too, if I could of. So all of this fitted on the passenger seats and floor and I could still about change gear and use the handbrake.

Now it was time to load up my pride and joy. I asked the missus to help me get it lined up but it was getting close to her bedtime (8:30pm). Loading went smoothly the sump just cleared and it was on. Apply handbrake, drop clutch, put it in first, engine off. Make sure the handbrake is on good and tight. SNAP! WTF I just snapped my handbrake cable. M*****************R!!!!!! To much adrenaline pumping through my system and I’d managed to break the cable that goes from the handbrake to the cables for each of the rear wheels. Now I had a long history with this handbrake setup, I was never happy with it. I’d positioned the handbrake so that I wouldn’t need to shorten any cables, or I thought I had. The plate that positions the two rear caliper cables could of done with being 20mm further back because although the handbrake worked I had no adjustment left at the handbrake end I had to just wind the caliper pistons in very close the the discs. Not ideal! i had a lot of travel in the lever itself and I wasn’t happy with it or the potential for drag in the off position. So I read up and decided to shorten the cable I did this at the HB (handbrake) end as the other end required a lot more work. This was not a good idea I’d cut the cable slotted the thingy and welded the cable into the slot. This is were it had failed due to fatigue, there’s a reason they don’t come from the factory welded, I know that now! So I’m up s***t creek, but I might just have a paddle! Me being me I ordered a brand new HB cable and left it in the bag for resale if I didn’t need it. Even though I was probably, in my mind, now going to now fail on the HB, I needed to get the car there for the test and needed the HB to load it on the transporter! So 9:30pm at night I’m outside in the dark, thank good I sorted out the outside lights, fitting a new cable and adjusting the brakes. 10:30pm I’m reloading on my own this time.

All strapped down and all the kit back in the cab it was time to put the rain cover on, as of course I wasn’t going to get away with a rain free 24hrs. Took ages but by 11:30pm I was all locked up and the family car was guarding the driveway entrance and I was in the house making sandwiches and having a beer to switch off my racing mind. I went to bed at 1:30pm but was going to have to be up early.

My Alarm was set for 5am, I decided to change the default sound to something more gentle on my phone, and then in no time I was fast asleep, OK I had three beers. 5am rolls around and the alarm scares the s**t out of me and the wife as we both had no idea what it was. Doh. Up at 5:15am, large bowl of Muesli, shower and a cup of tea and I’m out the door by 6:15am and on my way, waving goodbye to my the entire family. Ahhhhh.

So you’d think you’d be able to travel 50 miles on a motorway at 6:30am in relative peace and tranquility and get there within the estimated time of 56 minutes wouldn’t you. Wrong the M62 was absolutely rammed. I couldn’t believe it, I was shouting at all these weirdos going to work at this ridiculous hour. I’m not a morning person can you tell? Anyway I got there with 5 minutes to spare, parked up and went into reception. I then remembered I’d left the booking number in the truck but as I was out there a yellow coated inspector asked me if I was the 8am and told me to unload and drive round the back.

Unloading went smoothly. Nothing to report here and I was round the back parked up with the engine running. I was asked by a younger inspector to leave it running and remove the bonnet. He was nice, seemed interested in the car and ask if it was all my own work. I proudly said “yes, apart from the bodywork and wishbones.” they seemed impressed and then he recognised it as a haynes roadster so they are obviously aware of the mark.

At this point my inspector for the day came out the office, he had a look around asked for the V5 for the donor of the engine. I thought this was odd but explained I had a letter to prove engine age. He seemed happy with this and then asked for my paperwork. I wasn’t sure what he meant and he asked if I’d checked in at reception. I explained I was going to but then someone told me to unload and get it round the back before I could. Mmmm he didn’t seem to happy and said “Were not getting of to a good start are we?” I wasn’t sure if he was annoyed or just jesting, it was too early for me. So he went of to the office and got the necessaries.

Next I was asked to get in the car and hold it at between 2-3k, he was starting the emissions test I gathered. Insp. “Is it warm he asked”, Me “yeah it should be” Insp. “MMM it’s at 0.8 needs to be down at 0.2” At this point I was running through possible issues as the car had always stunk of fumes at home and then I noticed it said BET on the screen, I was sure that wasn’t the right test for this engine but it was early, I hadn’t had much sleep so I said nothing. He then asked me to rev it more and get it really warm. I did this and we tried again. Same. At this point I asked if the was a CAT test or a NON-CAT test. He said “CAT” I said “Errr it doesn’t have CAT, it will fail a CAT test without a CAT” I then went on to explain the letter was there to prove the engine was made prior to August 1995 so it could be tested using the NON-CAT test. He agreed but said the machine kept coming back with the CAT test when he entered the information. I was thinking “WTF” but good enough he said we’d have a look at it later and if it still does it we will ignore it, “Nice one!” I thought.

Up next was a weigh in on some new scales they’d recently purchased. I think they had arrived that day and they were keen to test them out. Not sure what figures they had as I was too busy jumping in and out of the car and remaining still etc.

On to the lift, this was were they did the light tests etc standard stuff but he seemed to have a special order in which to find any earth of other faults with the wiring. He asked for sidelights then asked for the rear fog. I duly obliged he then said “ have you got your fog on, are we having problems?” I said “no, it is on. Do you want me to turn the dip beam on?” Maybe it was a bit early for him too.” or we had a little communication breakdown. For those that don’t know reading this. If your fog works with your side lights, that’s a fail. It should only work with dip and main beam.

Next were going up in the world and I’m asked to do a few things. Then I’m asked to pump the brakes and yank on the handbrake repeatedly. I stop after 5 but he asks me to continue. Thank god that cable snapped at home. Although I would of had the replacement with me if it had. :-) At this point he starts to have look under the front of the car and I’m asked for steering lock each way. He then asks about the steering uj bolts and if the UJ itself is a threaded type or not. I couldn’t remember and he informed me that the nylock nut used was no where near fully threaded up. And he was absolutely right I’d stuck a bolt in and thrown a nylock on but the nylon was not on any threads. He said If I had a longer bolt I could fix that later. ok cool. At this point I’m thinking we could be good here.

Next thing is he pops his head out and announces that my column is far to straight and will be like a spear in an accident. Uh oh, WTF I’m in trouble here. I say “really? I have two u-joints and have retained all the collapsible features on the mx5 column. He said it doesn’t matter in a front end collision it will come up right through you. Bollocks!!!

Back down on the ground and we’re checking the headlight aim. They’re both a bit low so he lets me quickly adjust them and on we go to the traditional weighing roller thingies. They compared them to the other scales and there 1-2kg out.

Next the rear cover came off and he was checking out the tank breather which I had actually redone a 4th time in 6mm copper tube. The young inspector asked if I’d made the tank myself to which I proudly admitted to, I hastened to add that it was all metal, there was no sealer or bog in there. My inspector said “Yep that’s spot on!” He then informed me that during the brake/indicator test on the rear clusters that there was bleed from the indicators into the brake section slightly. I asked what would cause that and he said usually a bad earth design or the separator was absent. I explained that there was 3 separate earths at the rear and the clusters were from caterham. He didn’t say anything and we moved on to the brake test.

I’m pretty dejected by this point the last thing I thought I’d be had on was the column extension. I was running through how I could get round this and redesign it but I had no chance of fixing this without major dismantling and redesigning. And he had a point it was kind of looking like it might kill me. Hmmmm!

I then overheard him speak to another inspector, he was sat in the car looking around. “It’s simple but effective isn’t it, purposeful.” I think what he was saying that there was almost nothing to test interior wise. It was so basic in there that there was no need to get out the inspectors “big balls”!

Brake test wasn’t looking good either, he was making negative noises about the power of the brakes, on went the foot pressure thing and he said “That servo is not working!”, OMG! He went through the rest of the test and I was trying to get some answers about the servo issue. We had a chat, he said if a car has a servo it must work just like the horn, and then I came up with the idea that it could be the vacuum hose. It has a little oneway valve inside and I remember all those years ago when I modified it and refitted it I couldn’t or didn’t figure out which way round it should go so I just guessed. It was something I think that bothered me at the time but it must of been lost from my mind over time. In fact I distinctly remember looking over my shoulder at the car and eyeing the servo hose but I couldn’t put my finger on why it was bothering me, weird, E.S.P. ? Anyway I asked if I could check it and fix it to redo the test, but he said it might pass I’ll have to enter the results into the spread sheet. I don’t think he seemed keen on redoing the test, not sure.

Anyway it was morning break time I had 15 minutes to remove all the suspension nut covers and check that hose. Well blow me on very close inspection of the vacuum hose I found a very faint yellow arrow with the letters ENG on the end of the arrow and it was pointing in the wrong direction! Haha a victory! I then got onto that UJ nut but didn’t have time to sort it before he was back. I told him I had sorted the servo and he seemed happy with that. He then mentions another not fully home nylock nut on the front suspension, the lower ball joint one that comes up through the bottom of the wishbone. I agreed but also let him know that bolt went through threads in the joint itself and that they had loctite on them. The nut was just so I could fit a cover! He was happy, then mentioned a couple of others that were close. At this point I asked if I could speak to him about help and advise on my column extension issue and how to fix it. I offered to remove the pedal cover so we could see the rest of the column and UJ. I ran through the all the safety features of the upper column and explained that I had put serious thought into making it safe. He asked me to turn the steering back and forth while he looked at the UJs. I mentioned that the angle of deviation from the centre line should be 10˚ according to the manual “shouldn’t it” I said. I was trying to say in as un-confrontational way that I believed the angle was 10˚, if pushed I might of asked him to measure the angle, so I new what I needed to do to get it to pass! At this point he looked like he was possibly reconsidering his previous judgement but he gave nothing away and disappeared off into the office. When he came back he jumped in to take it for a blast and to check the mirrors and said he’d see me around the back for a noise test. I told him to enjoy himself, but not too much. He laughed!

At this point I’m completely in the dark about a pass or a fail.

He arrives at the rear and tells me “You’re going to have some fun in it but you'll need to wear goggles due to stones flying up”. I said I’d be wearing a bike helmet and lied that maybe I’d fit mud flaps on the front. He sets up the noise test and it is a doddle 4600rpm 92db! “Easy” I said! I told him I had made an exhaust before that one and that it was a complete abomination that made me laugh every time I looked at it but it sounded great. He smiled and then he was gone again.

I still haven’t fixed that UJ bolt, he comes back and tells me I can load up, “oh right I was just fixing that UJ bolt” I say. I’m shocked that it is done and over it was only 10:30am, so I’m emptying the the truck cab trying to find a good solution and then it hits me. As my inspector seemed to have such a hard-on for locktite I’d just use a thinner nut with some blue stuff. Job done!!

I’m all done when the inspector returns, he has a piece of coloured paper rolled up in his hands he asking if I used a spring washer on the bolt and I say “no loctite”, nutsack doesn’t he like loctite anymore??

"Well" he says “I’m pleased to say you’ve passed!” “Ahh yes, You Beauty! Thank you very much” I say! “Although you would be better to fit another joint in the column it should be fine and will pass over your shoulder in the event of an accident.” he advised me. “You’ve obviously put in a lot of effort and it shows so, well done, not many get a first time pass you know.”

Don’t I bloody know it.

The Inspectors there on the day were friendly pleasant with an air of authority but they weren’t lording it about like you might imagine. They were fair but stringent on the requirements and I now have much better brakes, and a safe steering column and will feel much better about hooning it about on the road.

Thanks Gary (VOSA Inspector)


Chris_Xtreme - 18/3/15 at 10:30 PM

nice write up !!!

always good to have a bit of drama, tension, makes the great news deliver an even bigger grin

well done on the first time pass.. fantastic.


NigeEss - 18/3/15 at 10:33 PM

A tense time, but good result, congratulations.


ReMan - 18/3/15 at 10:58 PM

Nice tale, car looks great, Congrats enjoy


ctwv50 - 18/3/15 at 10:59 PM

Cheers now for the DVLA!


adithorp - 18/3/15 at 10:59 PM

Nice one!

Get it registered... Stoneleigh is only 7 weeks away.

Having typed "nice one!" twice tonight, I've just done a search and I've congratulated over 200 people so far.


ctwv50 - 18/3/15 at 11:01 PM

quote:
Originally posted by adithorp
Nice one!

Get it registered... Stoneleigh is only 7 weeks away.

Having typed "nice one!" twice tonight, I've just done a search and I've congratulated over 200 people so far.


Nice one!


Daf - 19/3/15 at 09:04 AM

Fantastic! Car looks brilliant too - I love a red car with black wheels!


Smoking Frog - 19/3/15 at 09:22 AM

Annoying how these things happen at such a important time. At least it made a good write-up. Looks good Congratulations.


theduck - 19/3/15 at 09:59 AM

Great result, and just in time to get registration sorted for Stoneleigh!


CosKev3 - 19/3/15 at 10:33 AM

Well done

I usaully get bored reading long write ups like that and give up half way through,but you've written that so well it felt like I was there and could feel your worries/pressure etc, excellent write up!


MP3C - 19/3/15 at 10:34 AM

Good read! Congratulations!

Matt


leon51274 - 19/3/15 at 10:44 AM

Well done that man!

That story brings back memories of my IVA last year and how tense it can be when trying to offer all the correct answers while trying not to get in a pickle.


davidimurray - 19/3/15 at 07:16 PM

Congratulations and great write up.

Brings back happy memories of my test.


ctwv50 - 20/3/15 at 01:33 AM

quote:
Originally posted by CosKev3
Well done

I usaully get bored reading long write ups like that and give up half way through,but you've written that so well it felt like I was there and could feel your worries/pressure etc, excellent write up!


Thanks for your comments and the others too. I wanted to try and convey the experience as well and as in detail as possible but was aware it could be pretty boring so I'm glad people enjoyed the read. I'm now insured with Blackford Bloor & Co for £145 with £100 excess. DVLA application will be posted of Monday.

Oh the brakes are so much better now, much less pressure required, so i'll have to get use to them all over again.

[Edited on 20/3/15 by ctwv50]


The Black Flash - 20/3/15 at 07:49 PM

Well done OP, good write up too, gave me flashbacks


Turbo Tez - 30/3/15 at 07:31 PM

Excellent write up, I hope their as nice when I take mine