A few bits for sale, some pics in my archive others to follow.

Aeroscreen double bubble type with hole for centre mirror £20.00 + p&P sold
Rear wings £20.00 +p&p
front wings £10.00 +p&p need minor repair
rear lights land rover type red and orange £10.00 +p&p
front bike indicators £5.00 + p&p
bike mirrors can't remember the model £10.00+ p&P
centre mirror race tec £20.00 +p&p sold
nose cone extended toward the bonnet can be cut back £15.00 + p&p
low back caterham seats £60.00 +p &p
or collect hole saw set never used cost £40.00 will take £20.00 + p&p
4 alloys 13" with 205/60/13 tyres almost new + spare tyre £120.00 +P&P sold
cycle wing stays home made for cortina hubs £10.00 + p&p
Acewel digi dash fitted and will be removed £25.00 +p&P SOLD
I have a ali bonnet with some cracks offers
head lights originally westfields good condition all working £40.00 + p&p.
Head gasket set open not sure if any small bits are lost, this is for a 1.6 £5.00 _p& p
timing belt for 1.6 pinto £5.00 inc postage.
coil overs non adjustable type very firm from the rear of my car need a tidy up £10.00 p&p
I travel about a bit so may be able to drop off

More may come

[Edited on 18/9/11 by kj]

All pics in archive under for sale

[Edited on 18/9/11 by kj]

[Edited on 18/9/11 by kj]

[Edited on 18/9/11 by kj]

[Edited on 19/9/11 by kj]

I'm interested in the bike indicators subject to a photo please?! Are they in good nick?

Cheers

Adrian

what PCD are the alloys? make of tyres etc?

Interested in bike mirrors and cater ham seats if you could post a picture! Thanks

What size are the rear wings? Width and a rough diameter please.

Thanks, Chris.

Mite be intrested in the cycle wing stay,do you have a pic ? Dont need postage as I am in the toon every monday and wednesday night. John

Can I have second dibs on the cycle wing brackets if John does not take them please?
Again, postage would not be required as I am only in Durham and could collect at short notice.

Regards
Jon

Hi

Seat pics in archive, the rear wheel arches are 9 and half inch wide.
Cycle wing stays seam a bit flimsey could do with the tops beefing up a bit will get pics later.
Wheels are originally of a 2.8 injection capri.

I'll have a quick measure of what width rear arches i need tonight when i get home and I'll let you know.

Thanks again, Chris.

Does the Acewell come with the speed sensor? If so, yes please....

yes it has speed sensor, one of the wires had to be extended but works fine, its the basic unit no temp gauge or warning lights

wing stays in archive now.

any chance of a picture of the rear arches please? Also, what holes are in them?(for lights)

Cheers, Chris.

u2u wheels thanks

u2u back jamster.

u2u wheels

Hole saw set
U2U sent

u2u's up to date.

Kj, sorry to let you down, the rear arches are too narrow.

Cheers, Chris.

No probs.

U2U sent re; front & rear wings.

u2u sent,

Replied to. Wings now mine, all mine. :-)

u2u sent regarding the cycle wing stays.

Up date,

wings both front with wing stays and rears gone now.