Board logo

4 x Yoko A-021R on 13" Ford laser wheels
Jon Ison - 18/10/13 at 08:17 AM

2 x 205/60R13
2 x 185/60R13

All good plenty of life left, wheels straight though a clean wouldn't go a miss, this tyre as a reputation as been one of if not the best in the wet.
















£200 ono collected nano seconds from J29a M1, can take to Oulton next month.


beaver34 - 18/10/13 at 09:04 AM

what offset are the wheels?

and how old are the tyres

thanks


wicket - 18/10/13 at 09:23 AM

ET19


Jon Ison - 18/10/13 at 09:25 AM

Standard laser 19mm offset, cannot find a DOT reference anywhere, can some one point me in the right direction where/what to look for ?


wicket - 18/10/13 at 12:48 PM

Jon, do you mean where is it marked on the rim, if so mine is cast in one of the spokes in the following format: 6Jx13xCHx19


Jon Ison - 18/10/13 at 01:18 PM

Hi, no the date of manufacture for the tyres, cant find it should be on there somewhere.


wicket - 18/10/13 at 04:37 PM

Note 3 gives you the answer by the look of it.

http://www.ehow.co.uk/how_6888642_do-check-age-yokohama-tires_.html

I have A-021R as well and I have just found what looks like the date code. Mine don't have DOT followed by 12 numbers as in note 1, but they do have what looks like the date code. It is FCFM-YYY3004 which equates to week 30 2004, so it looks as though I had better replace them when it goes back on the road next spring!!


[Edited on 18/10/13 by wicket]

[Edited on 18/10/13 by wicket]


meakin - 26/10/13 at 10:51 AM

Hi
Are these still available?
I would be interested, however the date is really important as the soft compound goes off/hard.

They have to put the date on these tyres it is the 4 digit code on the other side of the tyre from your photos of the side under the yokohama name I believe. As mentioned its above

Thanks
Paul


wicket - 26/10/13 at 11:25 AM

Yes from here, very good price when I had mine from them.

http://www.polleymotorsport.co.uk/Category.aspx?showme=2


meakin - 26/10/13 at 12:50 PM

Thank you for the link wicket

My question was really for the op abput the wheels and tyres he is selling.

Ive got brooklands alloys with awful nankings on at the moment so was looking at killing two birds with one stone as I think the lasers will be lighter.
If not I'll buy new tyres and get them fitted to the alloys ive got.
Paul


yellowcab - 26/10/13 at 02:18 PM

Hi Paul,

Jon sold these wheels & tyres to me, I'm using the tyres, but selling on the bare alloys.

Cheers


meakin - 26/10/13 at 05:09 PM

Ok thanks for letting me know
Paul