Hello,

For those of you using a freelander diff. The only bit needed from the freelander donor shaft is the 'inner' CV with the associated gaitors? Is there anything you take from the freelander shaft?

Cheers

Don't know about the shaft as mine were adapted and supplied with the kit.

Make shure you get the boot with it though as they're only available from L/Rover, expensive and usually factory order only. Universal ones won't fit either.

adrian

Sorry I wasn't clear. I have the Mac#1 supplied shaft, I meant the bits you add from the freelander donor, it is just the CV and boot?

Don't know...mines a Fury.

adrian

Just realised I am an idiot....

Next time instead of thinking, I will ask first!

if you need anything freelander related, use "paddocks" i just have for my dads freelander....excellent comunication and service.

http://www.paddockspares.com/

You need;

Diff, cv joints, boots [they cost 35 each] and the tri bearing and circlip that fits on the mac drive shaft.
my blog has some pics...

hth

I was a fool and forgot about the Trilobe... That's why I posted, I was sure it wasn't as simple (or cheap) as I was thinking. Got some donor shafts instead though.

On a side note I read on someones blog that actually the sierra shaft inner trilobe will fit a Freelander inner CV. Can't test this though as I don't have any freelander bits to play with yet.

quote:

---

Originally posted by mr_pr
I was a fool and forgot about the Trilobe... That's why I posted, I was sure it wasn't as simple (or cheap) as I was thinking. Got some donor shafts instead though.

On a side note I read on someones blog that actually the sierra shaft inner trilobe will fit a Freelander inner CV. Can't test this though as I don't have any freelander bits to play with yet.

---