can any one give me the correct tracking or steering geometry for a mac 1 type 9 r , thanks

mark at the factory told me to leave everything neutral at 0 degrees, It was then set up at the factory.

Are you after IVA settings or road settings? They are subtly different to allow correct amount of self centering at the test. For the road im running between -0.5 and -1deg camber and slight toe in, i do get some self centering too with correct road settings but not as much as when set up for the test. For SVA i ran high tyre pressures (between 35 and 40 psi), neutral camber and quite a bit of toe out (iirc).

[Edited on 26/5/09 by DarrenW]