Board logo

What's the best quick rack ratio for mac1
maximus1 - 7/4/13 at 07:52 AM

What's the best quick rack ratio for mac1 and what's the rack from
Serria ? Escort? Looking for some advice,just got car and I think it's not fast
Enough to correct I think it has a standerd one on thanks

fesycresy - 7/4/13 at 07:58 AM

It's a Sierra.

Try Rally Design.

wylliezx9r - 7/4/13 at 08:15 AM

Why post twice ?

deezee - 7/4/13 at 09:03 AM

quote:
Originally posted by wylliezx9r
Why post twice ?


Probably because he's new and doesn't realise that it pushes other requests for advice to the bottom and spams the front page.

snapper - 7/4/13 at 09:18 AM

Does the Mac 1 use a standard width rack or shortened on?
I am rebuilding a short MK one at the moment to sell on just need the bottom pinion bearing to complete

renetom - 7/4/13 at 09:35 AM

Hi
we changed from std to 2.8 & find it really good
ours is a Sierra rack but it has been cut down in length for the Indy
So we got ours from MK.
As the one from R&D was too long, being made for the std rack .
if yours is std length then R&D is you best option £99
Good luck
René

bigrich - 7/4/13 at 02:03 PM

Mac#1 as the MK uses a shortened sierra rack. 2.8 ratio is what is normally used . Give Mark or Col a bell. Rhey usually have them in stock and already sortened for use

maximus1 - 7/4/13 at 04:21 PM

Thanks big rich I will give them a call tommrrow

renetom - 7/4/13 at 04:27 PM

I would check out the Snapper offer if its a 2.8 & the right price .

ash_hammond - 7/4/13 at 06:54 PM

I agree with Rich, phone Mark or Col tomorrow.

They fitted a quick rack to my ZR and I never looked back.

Cheers

Ash