Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Burton rocker cover
andy3649

posted on 2/5/18 at 08:45 PM Reply With Quote
Burton rocker cover

Can anyone help me out, Looking for the early type Burton alloy rocker cover for a pinto, it’s the one with the large Burton logo cast in the top, not available anymore and I’m not keen on yhe new design. If anyone has one for sale please let me know.many thanks
View User's Profile View All Posts By User U2U Member
nick205

posted on 3/5/18 at 09:06 AM Reply With Quote
What's wrong with Henry's?

You can paint it a different colour if you like and (as I did) move the oil filler to the rear for better bonnet clearance.


View User's Profile View All Posts By User U2U Member
andy3649

posted on 3/5/18 at 10:11 AM Reply With Quote
It’s a Burton tuned Engine.......... so i want a Burton rocker cover
View User's Profile View All Posts By User U2U Member
bigtuni

posted on 24/5/19 at 02:03 PM Reply With Quote
Hi there
I am looking for a rear fill modified original OHC rocker cover. I am sure someone must have one collecting dust in a shelve somewhere??
Same or similar as the one posted above or this one here:

[img][/img]

[Edited on 24/5/19 by bigtuni]

View User's Profile View All Posts By User U2U Member
James

posted on 24/5/19 at 03:57 PM Reply With Quote
Greetings,

If you can't find a modified one I spotted that a Golf one has a really low filler neck and cap.

So I cut the hole and cap off the golf, cut the hole out of the ford and welded the golf one in place.

Clears bonnet just fine now.





------------------------------------------------------------------------------------------------------------

"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights." - Muhammad Ali

View User's Profile View All Posts By User U2U Member
bigtuni

posted on 24/5/19 at 09:22 PM Reply With Quote
That might be an option, but I was hoping to be able to avoid having to weld myself. I have no equipment.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.