germanguy
|
| posted on 13/6/10 at 03:46 PM |
|
|
cycle wings.....help
been giving my car a god run today and found that one off my front carbon wings decided to part company with the metal strut what is the best
adhesive for it ??
|
|
|
|
|
austin man
|
| posted on 13/6/10 at 03:48 PM |
|
|
silkaflexmake sure you clean the area and rough it up slightly to get the best adhesion
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
iscmatt
|
| posted on 13/6/10 at 03:51 PM |
|
|
i drilled some holes in my bracket to allow extra adhesion
|
|
|
omega0684
|
| posted on 13/6/10 at 03:53 PM |
|
|
bolt them on
I love Pinto's, even if i did get mine from P&O!
|
|
|
nitram38
|
| posted on 13/6/10 at 08:44 PM |
|
|
I did two things on mine.
1) I drilled the side wall of the wing and sent the bar through, not under the lip.
2) Once the bar is glued and set inside the wing, I used aluminium mesh to glue over the bar and increase the area contact with the wing. I smeared
glue all over and through the mesh.
1 year and no sign of them coming off.
|
|
|
nitram38
|
| posted on 13/6/10 at 08:44 PM |
|
|
I did two things on mine.
1) I drilled the side wall of the wing and sent the bar through, not under the lip.
2) Once the bar is glued and set inside the wing, I used aluminium mesh to glue over the bar and increase the area contact with the wing. I smeared
glue all over and through the mesh.
1 year and no sign of them coming off.
|
|
|
nitram38
|
| posted on 13/6/10 at 08:46 PM |
|
|
I did two things on mine.
1) I drilled the side wall of the wing and sent the bar through, not under the lip.
2) Once the bar is glued and set inside the wing, I used aluminium mesh to glue over the bar and increase the area contact with the wing. I smeared
glue all over and through the mesh.
1 year and no sign of them coming off.
|
|
|
nitram38
|
| posted on 13/6/10 at 08:50 PM |
|
|
I did two things on mine.
1) I drilled the side wall of the wing and sent the bar through, not under the lip.
2) Once the bar is glued and set inside the wing, I used aluminium mesh to glue over the bar and increase the area contact with the wing. I smeared
glue all over and through the mesh.
1 year and no sign of them coming off.
|
|
|
germanguy
|
| posted on 15/6/10 at 07:04 PM |
|
|
ok done now thanks
|
|
|
.jpg)
