mutleylocost
|
posted on 4/5/10 at 05:55 PM |
|
|
Male threaded track rod ends
Anyone know of a track rod end with a male thread (if poss. m14 x 2 same as rack) that will fit into cortina hub / steering arm.
Need to extend drumsticks and want to use a bit of aluminium hexagonal bar with a thread thru it
Cheers
|
|
|
Ben_Copeland
|
posted on 4/5/10 at 06:20 PM |
|
|
Wouldnt it just be easier to do it the normal way???
Whereabouts in Kent are you ?
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
mutleylocost
|
posted on 4/5/10 at 06:23 PM |
|
|
Hi, only need to extend by about 60mm and thought it may be an easier option.
Am in Maidstone.
|
|
blakep82
|
posted on 4/5/10 at 07:28 PM |
|
|
m14 male rose joints can be used. not sure what work needs done on the upright though... think they need the taper drilled out or something, and a
14mm high tensile bolt put though with big thick wshers either side of the rose joint
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
britishtrident
|
posted on 5/5/10 at 06:08 PM |
|
|
The taper Ford used is pretty uncommon on track rod ends I am pretty sure no male M14x2 TRE exists with the same taper otherwise somebody would have
used it and shared the info.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|