Tris
|
posted on 22/8/12 at 09:32 AM |
|
|
Sierra Tripode Metal Covers Wanted ?
Hello All,
After a set of replacement metal covers for the Sierra Tripode Driveshaft Joints.
I need to get a set of driveshafts shortened, so the tripodes need to come off. I know its possible to remove them carefully without damaging the
covers but thought i would see if i could get some new if they were available. Local Ford garage has drawn a blank.
Cheers
Tris
|
|
|
mads
|
posted on 22/8/12 at 09:39 AM |
|
|
see my post in the following thread:
http://www.locostbuilders.co.uk/viewthread.php?tid=77700
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
loggyboy
|
posted on 22/8/12 at 10:22 AM |
|
|
When I went in to my ford to get some about 6 months ago they had 3 cans in the warehouse on 3 day delivery, I needed 4 (and another part, the small
plastic washer that seals the end which wasnt stocked at all) and they couldnt find any else where in the country so I didnt bother.
I also needed my donor push in shafts shortended but as I couldnt get the parts together to rebuild them, I choose to source Lobro units.
Mistral Motorsport
|
|
baz-R
|
posted on 22/8/12 at 02:27 PM |
|
|
there are more than one type so be careful
quantum kitcars had a load at stonleigh try them
|
|
james jones
|
posted on 22/8/12 at 06:55 PM |
|
|
hi, i have taken many appart and re-used them without any problems,
|
|