locost 7 k
|
| posted on 26/3/14 at 07:25 PM |
|
|
flush type 9 clutch
So I'm currently fitting a type 9 v6 box to k series with a pg1 lightened flywheel, I bought a 2.3 v6 clutch but it fouls on the flywheel,
basically is there a clutch out there without the part that sticks out, picture shows the rover 220 turbo clutch what fits onto the flywheel and a
Ford v6 2.3 clutch
|
|
|
|
|
locost 7 k
|
| posted on 26/3/14 at 07:52 PM |
|
|
http://pages.ebay.com/link/?nav=item.view&id=230809560855
This looks like something I'll need but in Ford fitment
[Edited on 26/3/14 by locost 7 k]
|
|
|
19sac65
|
| posted on 26/3/14 at 07:55 PM |
|
|
There are various designs by different manufacturers
Luk,borg and beck plates are slightly different
Sierra 2.0 plates will be the same 23 spline and 215 mm so best advice is to go to a few factors or have a look on ebay
Have you a local clutch remanufacturer
|
|
|
locost 7 k
|
| posted on 26/3/14 at 08:03 PM |
|
|
quote:
Originally posted by 19sac65
There are various designs by different manufacturers
Luk,borg and beck plates are slightly different
Sierra 2.0 plates will be the same 23 spline and 215 mm so best advice is to go to a few factors or have a look on ebay
Have you a local clutch remanufacturer
That helix clutch looks nice, ideally it needs to be 226mm diameter and flush on just flywheel side, I'll email helix if they can make one to my
requirements
[Edited on 26/3/14 by locost 7 k]
|
|
|
