Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Work shop / garage bench ideas
mk85

posted on 25/4/16 at 11:43 AM Reply With Quote
Work shop / garage bench ideas

Am going to build my workshop bench and looking for ideas and seeing what other people have done.

Would anyone like to share pictures of theres please.

thanks

View User's Profile View All Posts By User U2U Member
z2000

posted on 25/4/16 at 11:57 AM Reply With Quote
I used pallet racking to make a very heavy duty workbench. It's fairly cheap to pick up and then you can either use wooden boards or pallets to build a top and shelves underneath. I'll try and dig out a photo if I can.





If it isn't broken; take it apart and fix it! Build PhotoBlog:
http://z2000.co.uk

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Matt21

posted on 25/4/16 at 11:58 AM Reply With Quote
http://locostbuilders.co.uk/forum/8/viewthread.php?tid=203669





Instagram: @matt211988

Photobucket

My YouTube

View User's Profile View All Posts By User U2U Member
nick205

posted on 25/4/16 at 02:33 PM Reply With Quote
quote:
Originally posted by Matt21
http://locostbuilders.co.uk/forum/8/viewthread.php?tid=203669



That's what I was going to do!

Just built mine with a frame of 4" x 2" timber I had to hand and a 2m sheet of kitchen worktop from Wickes @ £31.50.

Flat and stable and cheap as chips.






View User's Profile View All Posts By User U2U Member
tims31

posted on 25/4/16 at 02:41 PM Reply With Quote
Made mine and the draw unit from two sheets of 50mm plywood and the frame for the draws and other end of bench with 50x100mm timber, cost about £80 all in. Draw unit bolted to the wall and the top fixed to the draws and the frame on the end, very solid.

Description
Description


Description
Description


[Edited on 25/4/16 by tims31]





Build: http://www.martinsfurybuild.co.uk/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
nick205

posted on 25/4/16 at 02:54 PM Reply With Quote
Nice work and liking the shelves as well. You can't beat a good shelf for storing stuff

ETA...by chance I put a shelf up over the weekend designed to hold the kids cycle helmets and removing them from the garage floor.

[Edited on 25/4/16 by nick205]






View User's Profile View All Posts By User U2U Member
Slimy38

posted on 25/4/16 at 04:05 PM Reply With Quote
I went to Wickes and bought two double kitchen cupboards that were pretty beaten up so got them for a few quid, then a length of wood for a worktop that was similarly bashed and similarly cheap. It does the job perfectly, and the dents and scratches are now so numerous I don't know what were there to start and what have been added by me!
View User's Profile View All Posts By User U2U Member
joneh

posted on 25/4/16 at 06:57 PM Reply With Quote
Yup I used an old kitchen too
View User's Profile View All Posts By User U2U Member
mark chandler

posted on 25/4/16 at 08:19 PM Reply With Quote
Make heavy, bolt to the wall and floor then stick on a big vice

I made one from scaffold planks, cost £5 each for some old ones which I braced, glued and bolted together on a welded scaffold tube base, bit ugly but very very strong.

One in my current garage is 1" tube frame, 2" angle frame around the top with 38mm chipboard let in to this.

I added some steel around where the vice bolts, the whole thing is bolted to the floor and wall, useful for welding as the earth clip just sits on the angle and having a strong angle surrond is useful to bash stuff on.

View User's Profile View All Posts By User U2U Member
DanP

posted on 25/4/16 at 11:34 PM Reply With Quote
There is a nice style of homemade bench here that wraps around a tool chest:
http://www.garagejournal.com/forum/showthread.php?t=126086&highlight=toolboxes+workbench&page=3

Made my own here with some pre cut steel sections (just gave metal supermarkets my dimensions) that I welded up and painted:
http://media-cache-ak0.pinimg.com/750x/98/c1/3b/98c13b6b017b1d1d3332ecccc45ec0f6.jpg
http://media-cache-ak0.pinimg.com/750x/45/c7/d2/45c7d2a2356b757d51bba41071ecdd03.jpg

Cheers,
Dan

[Edited on 25/4/16 by DanP]

View User's Profile View All Posts By User U2U Member
Bluemoon

posted on 26/4/16 at 06:38 AM Reply With Quote
quote:
Originally posted by DanP
There is a nice style of homemade bench here that wraps around a tool chest:
http://www.garagejournal.com/forum/showthread.php?t=126086&highlight=toolboxes+workbench&page=3

Made my own here with some pre cut steel sections (just gave metal supermarkets my dimensions) that I welded up and painted:
http://media-cache-ak0.pinimg.com/750x/98/c1/3b/98c13b6b017b1d1d3332ecccc45ec0f6.jpg
http://media-cache-ak0.pinimg.com/750x/45/c7/d2/45c7d2a2356b757d51bba41071ecdd03.jpg

Cheers,
Dan

[Edited on 25/4/16 by DanP]


Nice, wish mine looked like that, don't have the time to keep it tidy can't see my work bench'; colour scheme is smart.

CNC looks interesting, kit or home brew?

View User's Profile View All Posts By User U2U Member
DanP

posted on 26/4/16 at 07:16 AM Reply With Quote
Hi,

Thanks, you should see it right now, mess everywhere and engine on the floor! Got the bank holiday to get it tidy and get the kit back on the road!

The cnc plasma is a kit from the US called a Torch-mate, the Lathe (and now Mill) are Wabeco units with factory fitted manual and CNC controls with the electronics and software replaced with Mach3 and Gecko-drives.


Cheers,
Dan

View User's Profile View All Posts By User U2U Member
dhutch

posted on 26/4/16 at 09:17 PM Reply With Quote
Dad build his bench, and its a cracker.

3*3 for the legs, and 3ft spacing, with 2*3 going front to back to make frames, top one of which is half-lapped in so the downward force acts directly on the leg not via the bolts (could likely have used large woodscrews these days), bottom one supports shelving, diagonal bracing comes from 5mm ply nailed to the frames and to the back. It then has stout angle brackets securing it to the wall all round.

For the top I would just inch plywood or the like which with something to stiffen the edge is likely enough for most jobs, if you are going to be a lot of hammering (woodwork) then its worth the spend to put a piece of 2*8 down the front edge which also gives you something to screw a woodwork vice up to and a metalwork vice down to.

There are some over-kill examples, but if its work working on, much better that than it wobbling at all.


Daniel

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.