Does anyone know the exact model of car the Mnr track rod ends are from? And the thread size of the rod end to steering arm nut? The m10 nuts I have don't fit and not sure if they are m10 x 1.0 or m10 x 1.25

Not sure of the make of the car, but if you put a 6mm bolt next to thread and they match it is 1mm pitch, if you do the same with a 8mm bolt and this is the match then you have 1.25mm pitch. Just a way to check if you don't have thread gauges

Andy

Thanks andy. Don't have any tooling like that. Just a hammer and a garage

I don't recall the size/thread pitch, but I remember mine had powder coating over the threads that wouldn't allow any nut on it...I had to use a tap/die set to clean out all of the threads.

*I think Andy is saying to use a spare bolt you have to compare threads...that way you can tell if it's a 1.00 or 1.25 pitch.

Yeah, I understand what he meant. I will do this on the weekend. I meant I don't have a Pitch measuring Tool