********************************
PX500-BLANK (Blank Baseplate for the Pipercross PX500 for retro fitting to any carbs/bodies)
PX500-R1-001 (Baseplate for the Pipercross PX500 plate ready cut for R1 carbs)
PX500-CBR900-001 (Baseplate for the Pipercross PX500 plate ready cut for CBR900 carbs)
PX600-BLANK (Blank Baseplate for the Pipercross PX600 for retro fitting to any carbs/bodies)
PX600-R1-001 (Baseplate for the Pipercross PX600 plate ready cut for R1 carbs)
PX600-CBR900-001 (Baseplate for the Pipercross PX600 plate ready cut for CBR900 carbs)
CVH18-IFLANGE-MS (1800 CVH Inlet Manifold Flange in 8mm Mild Steel)
CVH16-IFLANGE-MS/AL (1600 CVH Inlet Manifold Flange in 8mm Mild Steel or 10mm Alu)
ZTEC-XFLANGE-MS/SS (1.8/2.0 Zetec E Exhaust Flange in 8mm Mild Steel or Stainless)
DTEC-XFLANGE-MS/SS (1.8/2.0/2.3 Duratec Exhaust Flange in 8mm Mild Steel or Stainless)
*************************************
Contact For Prices.
The above are my latest offerings relevant to this forum, however please see my ebay store for the complete range (various tin top flange plates, lots of existing design alu flanges, bike carb kits, bike carb manifolds, bike bodies, bike body manifolds, adapter plates, plenum castings etc): danST Engineering on ebay
Be sure to PM me for best prices and LCB discount :-)
Thanks for Looking.
