We can now offer a Nose Cone Specific Naca Duct. The mould for these ducts was produced using a nose cone so they have compound curves to ensure a good close fit. The ducts come trimmed and polished ready to fit in either full Carbon (plain or 2/2 Twill ) at £80 plus p&p or self colored GRP in a range of standard colours for £60 plus p&p.
The ducts are easy to fit simply cut out a hole in the nose cone using the template provided and then simply bond or rivet the duct in place. The hole does not have to be super neat as it will be hidden by the flange on the duct.
They can be used to feed air to Induction Systems or combined with vents/holes in the rear of the bonnet to reduce under bonnet temperatures.
The ducts are 290mm Wide-370mm Long and 30mm Deep

Regards Carbon Copies Ltd

[Edited on 10/6/13 by Carbonman]

[Edited on 10/6/13 by Carbonman]