anyone using an electric oil pressure gauge on an XE,just wondering where you put the oil pressure sensor,also is there an alternative to the large baked bean can size sensor I have.
I know I'm a BEC, but I originally fitted my "baked bean can sender" hard mounted to the block via a brass adaptor. That lasted about
30 miles!
This time the can is mounted to the chassis, using a P clip, and a 300mm stainless braided hose runs down to the engine. This has lasted nearly 1,000
miles!
1-0 for remote mounting the sender!
HTH
Mike
quote:
Originally posted by Guinness
I know I'm a BEC, but I originally fitted my "baked bean can sender" hard mounted to the block via a brass adaptor. That lasted about 30 miles!
This time the can is mounted to the chassis, using a P clip, and a 300mm stainless braided hose runs down to the engine. This has lasted nearly 1,000 miles!
1-0 for remote mounting the sender!
HTH
Mike
another vote for remote mounting.