FASTdan
|
| posted on 3/9/13 at 07:58 AM |
|
|
danST Velocity Stacks - Now for Carbs too...
A bit of a follow up post to the last one which featured the GSXR throttle body velocity stack kits - several people expressed an interest in
aftermarket trumpets for their bike carbs. So in response I can now offer kits for the following:
Carbs....
ZX6R (both Keihin and Mikuni Variants)
ZX7R
ZX9R
ZZR600
ZZR1100
R1
Throttle Bodies.....
GSXR600
GSXR750
GSXR1000
GSXR1300
Stacks are available in 50mm or 90mm lengths. All designs allow a Pipercross style baseplate to be sandwiched below the trumpets if required.
A few pics....
90mm trumpets on ZX6R carbs....
90mm Trumpets, ZX9R's on a 2.3 Duratec.....
ZX6R's in Louis' mk1 Fiesta.....
GSXR1000 K5 Throttle Bodies.....
GSXR1000 K1 Throttle Bodies with 50mm trumpets and integrated Pipercross Baseplate.....
The stack kits are all circa £95. PX600 Filters and pre-cut plates to suit are £100 (add £13 for a compact PX500). Individual Stacks are £15 each and
are standard Jenvey/Weber Flange fitment. Available in the following sizes (internal dia x length):
40x50mm
40x90mm
45x50mm
45x90mm
50x50mm
50x90mm
We can also advise on trumpet/spacing/filter combinations to ensure correct fitment:
Free carriage currently offered until end of Sept on any velocity stack purchase.
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
