daniel mason
|
posted on 16/7/13 at 04:13 PM |
|
|
its track and sprint only so anything is possible if on budget!
car runs live axle rear end.
|
|
|
sdh2903
|
posted on 16/7/13 at 04:39 PM |
|
|
I've seen a few zx12 lumps going for 1200 ish that would leave a bit left over for the install. Similar bhp to the newer 10 but bit more torque
and proven to be reliable. I think the final drive may be more suitable?
|
|
JimSpencer
|
posted on 16/7/13 at 04:55 PM |
|
|
Hi
Ahh a customer of "Mr Healy, purveyor of quality automobiles" - his 'showroom' is an experience isn't it?
If you sprint it it'll be in Sports Libre, cc class splits vary a bit but normally it's up to 1700cc for club meetings and up to 2L for
National events, so pretty much any bike engine you like.
Think if you were to circuit race it then it would be 750mc BikeSports and there's classes in that to suit pretty much any cc.
The only thing I can think of that is a nominal max of 1000cc is RGB?? but even then I think you can run more but there's some odd BHP limit
thing??
The Reynard in my avatar runs a ZX10 lump, if the gearing is odd i've not noticed to be honest
Couple of comments above re dry sumps, while I would concour that a Dry Sump isn't essential, whatever you fit will need to be properly baffled,
especially as the engines longitudinal rather than the norm, mines baffled and has an accusump fitted and it's very surprising how often the
accusump operates - personally I think this might actually be a good all round 'belt and braces' solution for little extra money (Dry Sump
kits being more expensive than replacement engines, accusumps being a few hundred quid)
HTH
|
|
daniel mason
|
posted on 16/7/13 at 04:56 PM |
|
|
maybe so. ive been looking at the zx12 also but by the time i factor in. power commander,exhaust,gear indicator,sump mods etc it will end up a bit
dear i think. unless someone has a full package for sale?
|
|
JimSpencer
|
posted on 16/7/13 at 04:59 PM |
|
|
Hi
Thinking a bit further..
Given that it's probably not far off full working order under the layer of dust..
I would spend as little time as possible to get it up and running.
Get out there and give it a nice gentle shakedown, and then a couple of damn good thrashings..
Once you've done that and wandered round a few paddocks you'll come up with A Plan and a List which you can while away the winter hours
working your way through ready for next spring
|
|
Dopdog
|
posted on 16/7/13 at 05:04 PM |
|
|
quote: Originally posted by franky
quote: Originally posted by sdh2903
Malc from yorkshire engines has a 2010 zx10r listed on ebay for 2k that I'm sure he will drop in price to deal direct. They make very good power
180bhp ish iirc. They are a light engine and don't require dry sumping.
you should get one for £1.5k ish.
Why not fit a 1198 ducati lump. surely a 1.2ltr twin can race against a 1000cc 4 like in bike racing classes?
the class changes at 1100 so he would be in with the big boys
|
|
JimSpencer
|
posted on 16/7/13 at 05:13 PM |
|
|
quote: the class changes at 1100 so he would be in with the big boys
Isn't that for single seaters? this is a sports libre ADR? or is that a regional thing?
|
|
Dopdog
|
posted on 16/7/13 at 05:27 PM |
|
|
Yes you are correct Jim![](/images//smilies/smile.gif)
|
|
JimSpencer
|
posted on 17/7/13 at 04:26 PM |
|
|
Spotted!
I was sat in a que on the southbound M6 a short while ago.
Heading northbound an ADR on a trailer, Number 50, fetching shade of purple, looks quite smart
|
|
daniel mason
|
posted on 17/7/13 at 07:31 PM |
|
|
colours not the best jim but its a superb machine. looks well made.a few bits i need to alter but on the whole am well chuffed at the price!
you were right about the unit. i had to swerve around about 50 x vw's to get near his unit
|
|
JimSpencer
|
posted on 17/7/13 at 09:14 PM |
|
|
Hi
Excellent stuff, you'll have to keep us posted about when it's going to turn a wheel again in anger![](/images//smilies/cool.gif)
|
|
Dopdog
|
posted on 17/7/13 at 09:20 PM |
|
|
someone has a new avatar, I bet you cannot wait
|
|
daniel mason
|
posted on 17/7/13 at 09:33 PM |
|
|
im just looking into engine options atm but the thing that slightly bothers me is the rear axle,which i believe is a morris 1000. and from scouring
the net it seems the lowest diff ratio they did was a 3.72:1 which wont help matters much!
|
|
scootz
|
posted on 17/7/13 at 10:16 PM |
|
|
This thread needs photo's... lot's of 'em!
It's Evolution Baby!
|
|
Dopdog
|
posted on 17/7/13 at 10:18 PM |
|
|
I Agree lets have um we like projects
|
|
daniel mason
|
posted on 18/7/13 at 07:42 AM |
|
|
there is a couple on my other thread about my new project
|
|