mutleylocost
|
posted on 30/4/10 at 03:54 PM |
|
|
Solid discs or vented
Whats the general opinion on front discs.
Got 170 bhp k-series and want to do some sprinting / track days etc.
Like the idea of vents but are they a bit of overkill, obviously heavier.
Will be on willwoods
|
|
|
iank
|
posted on 30/4/10 at 04:22 PM |
|
|
Solid, a 7 is too light to get heat into vented discs so they won't work as well.
Unsprung weight will be better with solids as you say.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
designer
|
posted on 30/4/10 at 04:39 PM |
|
|
Ditto, solid.
|
|
Worzey
|
posted on 30/4/10 at 04:49 PM |
|
|
I had vented discs and sierra callipers.
Replaced them with Wilwoods and single discs (also drilled and grooved because I'm a tart).
It totally transformed the handling of the car. One of the best mods I ever made.
Done a few trackdays since the upgrade including Goodwood which is a fast circuit with very heavy braking from 130mph. I didn't get any fade at
all.
Caterham R400
|
|
BenB
|
posted on 30/4/10 at 06:58 PM |
|
|
Solid. No need for vented on a light, open wheeled car like a Seven. Just silly pimpin' bling to go grooved/vented....
|
|
dhutch
|
posted on 30/4/10 at 09:50 PM |
|
|
quote: Originally posted by Worzey
I had vented discs and sierra callipers.
Replaced them with Wilwoods and single discs (also drilled and grooved because I'm a tart).
It totally transformed the handling of the car.
Interstesting.
- What state where the m16's in beforehand? Pads?
|
|
Worzey
|
posted on 1/5/10 at 08:05 AM |
|
|
dhutch,
They were changed only to reduce unsprung weight and what a difference. Where I had bump steer before it's now gone and the turn-in is so much
sharper.
I went with the Wilwood Powerlites (Sierra) with the basic Smart pads.
They where in good condition before the Goodwood trackday and seam to have come out of it okay - much better than my Gaz Shocks
Caterham R400
|
|