Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Murdered my red-top yesterday.....
stevegough

posted on 4/5/11 at 08:07 AM Reply With Quote
Murdered my red-top yesterday.....

I have had a little mishap with my engine yesterday - You could call it 'self-inflicted' as just before going to stoneleigh, I bent my brake and accelerator pedal arms to the right to give a better fit for my feet. It was better, but what I didn't realise, if I floored it, the accelerator pedal could jam against the chassis rail. It did it once on the way to Stoneleigh, but freed off a second or two later. The second time it jammed was on the way to work, but it freed off again easily - third time, it didn't! engine revving like crazy, had to declutch, couldn't stop it - must have been 10 secs or so, approaching a busy junction - turned the ignition off - result - siezed engine.

So, anyone got a spare C20XE short engine (obviously, I've got all the ancilleries) ? I can come and collect and willing to pay 'reasonable money' for it - I dont want one I need to rebuild (I know my limitations!) but please ask around and see what's available?

Cheers, Steve.
By the way, it was great to finally meet a few of you 'in the flesh' at Stoneleigh - Mel,(rusty nuts) the two Clives and their wives, Liz and Sara,(Jollygreengiant and snuggs), Geoff (wilkingj), Beccy and 'feet'(Perci), tomgregory, neilP, kenton, steve lovelock, Paul(notts), Ken555, RichardK(and the 'Bruise', Adrian (adithorp) and quite a few others. It was a great weekend.


Edited to add...I can come and collect, but obviously (to me, anyway) I don't mean the other end of the country - I would arrange a courier for that.

[Edited on 4/5/11 by stevegough]





Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14

View User's Profile E-Mail User View All Posts By User U2U Member
adithorp

posted on 4/5/11 at 08:15 AM Reply With Quote
Bugger!

It ran so well on the way down a well... but I thought you were just having fun when you came flying past!

If it's now siezed it'll have bent a rod.





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
jossey

posted on 4/5/11 at 08:15 AM Reply With Quote
Shiiiittttt.

sorry to hear that mate.

glad your ok though.

plenty worse things could have happened with that happening.

good luck with your rebuild but jus be thankful your ok.





Thanks



David Johnson

Building my tiger avon slowly but surely.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
cd.thomson

posted on 4/5/11 at 08:25 AM Reply With Quote
glad you're okay steve,

hope you get it sorted quickly, at least it wont be as tricky as fitting an engine for the first time!





Craig

View User's Profile View All Posts By User U2U Member
jollygreengiant

posted on 4/5/11 at 08:59 AM Reply With Quote
Sorry to hear of your tribulations Steve. Nice to have met you as well.

Glad you got home though.

I too had sticking throttle problems on the way home, however, it was not due to pedal or a sticking spindle. You know you commented about the ducting and the hole in it, well, I found the missing bit that constituted the hole. It was trying to feed its self past the throttle butterfly. Un-sucessfully I might add. Looks like I have some repairs/modifications to make. It looks like it was caused by a stone being thrown up onto it so I shall have to replace the section and then I shall wrap it with a rubber type coating.

Hope you get sorted soon.





Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.

View User's Profile View All Posts By User U2U Member
sevaun

posted on 4/5/11 at 09:46 AM Reply With Quote
Engine needed - I have one

Hi Steve
I have an engine and I've e mailed you.

Cheers

Richard

View User's Profile E-Mail User View All Posts By User U2U Member
karlak

posted on 4/5/11 at 10:36 AM Reply With Quote
No nothing about these engines etc, but did see this on another forum. He seems to think it is a bargain...

http://www.turbosport.co.uk/showthread.php?167462-Zero-Miles-2021cc-C20XE-Neil-Roper-Head-ARP-etc-etc-**Bargain**





MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2

View User's Profile View All Posts By User U2U Member
nige

posted on 4/5/11 at 02:00 PM Reply With Quote
no good at links soz

but there is a short block on ebay with dry sump

it s title is vauxhall 2000 engine

good look mate





when you start this journey
you think it will be done in " no " time but then " no " turns into a " bloody " long time

View User's Profile E-Mail User View All Posts By User U2U Member
stevegough

posted on 4/5/11 at 02:14 PM Reply With Quote
quote:
Originally posted by nige
no good at links soz

but there is a short block on ebay with dry sump

it s title is vauxhall 2000 engine

good look mate


this one, you mean? VAUXHALL 2000cc engine block | eBay UK

Its quite a find, but I would need to rebuild the top of the engine, too - I'm not sure I'm up to that....

Thanks for the info, Steve.





Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14

View User's Profile E-Mail User View All Posts By User U2U Member
stevegough

posted on 6/5/11 at 07:26 AM Reply With Quote
Thanks for all the heartfelt replies, Clive, Craig, Adrian and Jossey - you are quite right, it could have been so much worse.....

Cheers for the info and links, it looks like I am near enough sorted with a replacement, too thanks to sevaun.

Decided against the fancy one in your link, Karlak - it is a bargain, but I couldn't do full justice to it the way I planned to use it - it would have been a waste.

Thanks and regards, Steve and the PHOENIX ! (I had been wondering what to call it......)





Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14

View User's Profile E-Mail User View All Posts By User U2U Member
ken555

posted on 6/5/11 at 08:14 AM Reply With Quote
You need to update your footer



Luego Locost C20XE.
Build start: October 6th 2008.
First IVA failed Dec 2010.
Retested + passed Jan 28th 2011.
First drive Feb 10th 2011.
New Engine required May 2nd 2011.






View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
hucky

posted on 6/5/11 at 10:04 AM Reply With Quote
hey fella, may be worth keeping an eye on these to ebay links

VAUXHALL REDTOP ENGINE & ANCILLARIES C20XE / C20LET | eBay UK

rally race c20xe engine | eBay UK


the first one is very local to me, so if you need it collecting from the guy let me know and ill pick it up for you.

View User's Profile View All Posts By User U2U Member
stevegough

posted on 6/5/11 at 02:20 PM Reply With Quote
quote:
Originally posted by hucky
hey fella, may be worth keeping an eye on these to ebay links

VAUXHALL REDTOP ENGINE & ANCILLARIES C20XE / C20LET | eBay UK

rally race c20xe engine | eBay UK


the first one is very local to me, so if you need it collecting from the guy let me know and ill pick it up for you.


Yes, thanks for the links, Hucky - I am watching the first one (and seven others) but the second one doesn't interest me - I've already got one engine in need of a rebuild!

All being well, I should be picking one up this weekend in any case - the ebay ones are there as 'possibles'. Appreciate your surfing for me, though.





Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14

View User's Profile E-Mail User View All Posts By User U2U Member
stevegough

posted on 6/5/11 at 02:23 PM Reply With Quote
quote:
Originally posted by ken555
You need to update your footer



Luego Locost C20XE.
Build start: October 6th 2008.
First IVA failed Dec 2010.
Retested + passed Jan 28th 2011.
First drive Feb 10th 2011.
New Engine required May 2nd 2011.



Yes, Ken - mine didn't last quite as long as yours, did it? Appreciate the humour, though......





Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14

View User's Profile E-Mail User View All Posts By User U2U Member
stevegough

posted on 8/5/11 at 08:53 PM Reply With Quote
Thanks to everyone who posted links etc, I have now collected my replacement engine, (from sevaun in yorkshire) and I have commenced stripping out the poorly one.....


.....carefully......





Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.