Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Master cylinders with balance bar and bike Throttle Bodies
peter030371

posted on 6/1/14 at 02:27 PM Reply With Quote
Master cylinders with balance bar and bike Throttle Bodies

As I now have a new Striker kit various mods that I was going to do to my existing Striker will now no longer be happening. As I find the bits and pieces I purchased for the old Striker I will be posting them here first before ebay’ing them if they don’t get any interest here. My prices below are what I would start them for on ebay and I believe are half what they are currently selling for on ebay but it’s less hassle to sell them on here and I hate giving any more money to ebay

A pair of new brake master cylinders with balance bar assembly. As you can see from the picture below these are with the integral fluid reservoir.

£50 + postage





Honda Blackbird Throttle Body assembly. I can’t confirm 100% but think they are from around 1999/2000 model. Very good condition as I have had them stored for several years! They come with the often missing rubbers for connection to your manifold. Also has MAP sensor, TP sensor, fuel rail, injectors and regulator. I measure them as 45mm inlet tapering down to 42.5mm outlet.

£70 + postage







Any questions then just ask

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile View All Posts By User U2U Member
jwhatley

posted on 6/1/14 at 09:54 PM Reply With Quote
Peter,

what make and size are the MC'S?

View User's Profile View All Posts By User U2U Member
peter030371

posted on 7/1/14 at 08:39 AM Reply With Quote
quote:
Originally posted by jwhatley
Peter,

what make and size are the MC'S?


I purchased them from Fisher Cars several years ago and they have no makers mark on them that I can see anywhere. They do have size markings though in pen, one says 0.65 and the other 0.7 which was supposed to be 'correct' for my Striker.

The balance bar has a 7/16 UNF thread which means if you wanted to add an in-car adjuster the Rally Design RD3611 will fit

View User's Profile View All Posts By User U2U Member
ryanill

posted on 8/1/14 at 01:00 PM Reply With Quote
do you have a rough idea on the postage cost on the TB's
View User's Profile View All Posts By User U2U Member
peter030371

posted on 8/1/14 at 01:53 PM Reply With Quote
quote:
Originally posted by ryanill
do you have a rough idea on the postage cost on the TB's


I can send them out using a 2 day parcel service for £10 including insurance

View User's Profile View All Posts By User U2U Member
peter030371

posted on 9/1/14 at 09:14 PM Reply With Quote
TB sold subject to payment
View User's Profile View All Posts By User U2U Member
peter030371

posted on 14/1/14 at 08:25 AM Reply With Quote
Best bump this back onto the first page (as several people now seem to like posting one item per topic and not one topic per seller as per the simple rules of the forum ), master cylinders and balance bar still available.....
View User's Profile View All Posts By User U2U Member
hornetV2

posted on 15/1/14 at 10:27 AM Reply With Quote
U2U sent
View User's Profile View All Posts By User U2U Member
peter030371

posted on 15/1/14 at 11:26 AM Reply With Quote
All now sold, got some more bits but I will put them in a new listing later this week
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.