Bigkiltedwarrior
|
posted on 2/2/15 at 08:53 AM |
|
|
Pinto Camshaft Oil seal
So having rebuilt the top end of my pinto and fitted a new camshaft and set it all up, it looks like the muppet that I am, have forgotten to fit the
camshaft oil seal. DOH!
Before I have a complete melt down, can anyone advise if it is possible to press one in from the front with the camshaft in place, to save me having
to remove this and redo all the rocker gaps yet again?
Thanks
S
|
|
|
Dick
|
posted on 2/2/15 at 09:14 AM |
|
|
Yes take the pulley off and push one in
|
|
Bigkiltedwarrior
|
posted on 2/2/15 at 09:20 AM |
|
|
Thanks Dick, that's the answer I was hoping for!!! Feeling a rather big tool at the moment!!!!
|
|
Dingz
|
posted on 2/2/15 at 07:36 PM |
|
|
Yes as above but in my experience buy an OEM seal from Ford, Ive had poor aftermarket ones in the past.
Phoned the local ramblers club today, but the bloke who answered just
went on and on.
|
|