piggy1600cvh
|
| posted on 14/7/08 at 12:41 PM |
|
|
mondeo v6
hi all, just a quick question will the mondeo duratec v6 fit onto the type9 and will the engine fit into the engine bay of the 7? does any1 know of
anyone thats done this aswell?
many thanks
mat
|
|
|
|
|
ChrisW
|
| posted on 14/7/08 at 12:52 PM |
|
|
Gearbox wise, no, the bellhousing pattern is completely different.
As for fitting into the bay, anything will fit if you have enough imagination!
Chris
|
|
|
piggy1600cvh
|
| posted on 14/7/08 at 01:03 PM |
|
|
but with a adapter plate it will go in cool
|
|
|
grazzledazzle
|
| posted on 14/7/08 at 02:44 PM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=91744
|
|
|
trogdor
|
| posted on 14/7/08 at 09:25 PM |
|
|
i have heard that they bolt to a tr7 gearbox? Am sure i read a thread to that effect on here? Doubt the gearbox would last too long though.
They deffo don't mount to the type 9 directly or any ford inline gearbox that uses the orginal bolt pattern.
You would need a custom plate or bellhousing, its the prob i am facing with attaching an audi gearbox to my duratec V6.
|
|
|
trogdor
|
| posted on 14/7/08 at 09:28 PM |
|
|
have found the thread
http://www.locostbuilders.co.uk/viewthread.php?tid=88067
but rereading it makes me think its not a triumph gearbox
|
|
|
grazzledazzle
|
| posted on 15/7/08 at 07:57 AM |
|
|
Jaguar s stye box will do it. Not cheap though.
Mine was running a V6 type 9 with adaptor plate before being changed to T5.
|
|
|
