ive just fitted a Plumbed in fire extinguisher in my Mac#1 ,could of got a 2.5kg hand held but this was a Lifeline Zero 2000 Alloy Fire Extinguisher
4Lt & a right bargain so need to know where to put the 2 red T- handle cable pulls to be ok for track days ,any pics & help apriciated
...;-)
Seeing as you're fitting one you may as well follow the MSA guidelines - which would be as Chris says. Make sure you lubricate the cable well and
keep checking it. Those where the pull handle is mounted vertically have a tendency to collect water at the bottom of any bends and seize up pretty
quickly! Don't ask me how I know!
Regards
Wyn
I also have a cut-off switch for the electrics......
The car was built for race too.....and fitted before the fire systems were mandatory.....
http://www.locostbuilders.co.uk/upload/Fozzmobile4792.JPG
and
http://www.locostbuilders.co.uk/upload/Fozzmobile4793.JPG
As lsdweb has said, you must maintain it regularly.....
Fozzie 
ETA.......the links make the pics a bit small...
If you want to see clearer pics......my photo archive....>Folder......Fozzmobile April 2007 > scroll down to 'Cockpit'.... (second
picture is in same folder).......'Rear Quarter'........
[Edited on 16-4-08 by Fozzie]
And, as Fozzie has done, place them in an area where they won't get broken off and they still can be accessed when you've rolled it!
cheers everyone for your input/help ,Nice car btw Fozzie 
quote:
Originally posted by Ricks-9r
cheers everyone for your input/help ,Nice car btw Fozzie
