The engine itself has already gone but the chassis is complete with the engine cradle almost finished (bushes, spacers, bolts included) and the original pedal box removed...
NOTE: this cradle is fully removable should you wish to fit a 'normal' engine!
Engine In!
I have all Tiger fabricated front and rear suspension arms and uprights complete with meduim grade polyurathane bushes aswell as fully built up front cortina uprights with disks, balljoints and alloy hubs/ 65mm studs.
The chassis comes with a std westfield rollbar, most of the ally panels completed and a set of seatbelt eyes.
Wheels are 2 Off Caterham R500 alloy rears (13 x 8"
and matching fronts (13 x 6" with 2 x 205/50/13 Toyo R888s (tyres are brand new)
wheels are in excellent condition with only the odd small mark. https://www.caterhamparts.co.uk/product_info.php?cPath=105&products_id=114&osCsid=73798446e55938d11512dc762536a641
I also have an OBP superlightweight pedal box with dual brake cylinder (remote boas adjustment) and cable clutch pedal.
It has a reconditioned escort rack with TREs and alloy mounts. I also have all of the components required including rose joint to make up the column.
I have a set of stainless bolts/washes/nylocks for chassis - i.e enough for wishbones, , suspension and uprights (these long ones are plated steel).
Also:
Polo Radiator, new
Sierra handbrake
Sierra drums and rear bearing carriers/caliper mounts (depending on which method you wish to use)
Westfield rear light clusters
Also for sale is the full Tiger bodywork set, brand new in white gelcoat with black front arches.
body on
All the above are available as a job lot (looking for offers around £2750 for everything, will throw in all the extras i have accrued over the course of the project, car cover, a stack of kitcar magazines, DVD, sierra haynes manual and 2 off Avon build manuals (one grubby one for the garage and one wife-friendly one for in the house
Any interest please contact paul@tr3m5.com
Viewings welcome, would rather not split if possible but make me a handsome offer and i may be tempted
blade engine going in!
-Paul
[Edited on 6/9/2009 by Trems]
[Edited on 6/9/2009 by Trems]
