Board logo

Bike carbs, what are they worth?
scutter - 16/10/09 at 09:31 AM

A friend has asked me to sell his bike carbs, manifold, filter and linkages from Kitpartsdirect and was wondering what you guys and girls thought they were worth?

I believe he paid £400 all in, they have never been fitted. He's just realised that they will over fuel his 1600 pinto!







ATB Dan. P.s. i'm open to sensible offers


lotusmadandy - 16/10/09 at 09:33 AM

why will they overfuel his 1600 pinto,
i had a set on mine and mine didnt overfuel.

Andy


scutter - 16/10/09 at 09:51 AM

That's his belief and he wants shot of them!

Just the seller me Dan.


omega0684 - 16/10/09 at 09:54 AM

can't he just change the needles to reduce fueling.

if it a bogg bro's manifold?

what bike carbs are they?

piper cross filter and backplaye retail at £95 ish, but he won't get that for it.

if they are good carbs and a bogg manifold, he might see £250-£350, maybe.


02GF74 - 16/10/09 at 09:55 AM

piper cross £ 40 new tops
carbs, off ebay £ 30 to £ 50 tops

dunno about manifold, but £ 100, certainly not more than £ 200.

Bear in mind they are now S/H so the supplier is unlikley to honour any warranty, I'd say £ 150, to £ 200 tops.

but then, what do I know.


cd.thomson - 16/10/09 at 10:11 AM

what are the carbs

if they are zx9rs I'll be interested in the filter and back plate.

Alternatively could you measure the trumpet spacing


cd.thomson - 16/10/09 at 10:11 AM

what are the carbs

if they are zx9rs I'll be interested in the filter and back plate.

Alternatively could you measure the trumpet spacing


scutter - 16/10/09 at 10:43 AM

Sorry fella, he won't be breaking them, I think i'll stick them on the bay starting at £150 and see how we get on.

Cheers gents.


Danozeman - 16/10/09 at 11:54 AM

Whats he putting on it instead then??

With the alloy trumpets unless they are extras they must be cbr or something? Id say theyr just right for a 1.6 pinto. Jetted right.


ban1216 - 16/10/09 at 12:36 PM

Could you please confirm what the bike carbs are off so i can asses the choke sizes as to wether or not they will be suitable for my car


scutter - 16/10/09 at 03:01 PM

I'll go and check this evening, take some photos, those ones are off the GBS website.

ATB Dan.


big_wasa - 16/10/09 at 03:56 PM

As said they look like Honda cbr so prob fireblade and 38mm.

The filters are more like £90
You will be hard pushed to get a set of blade carbs for less than £50 at the moment.

They will be fine on the 1.6 if jetted ok and he can rejet them if he wants to get a 2.0

[Edited on 16/10/09 by big_wasa]