I have bought a Mk2 escort engine and box and there are no bolts to attach the 2 together, or for the starter or flywheel or clutch, any idea where I can get them from? preferebly posted.
kebrell nuts and bolts
Harper Road, Coventry CV1 2AP
Tel: 01203 552253
Fax: 01203 257849
if its a mk2, then it should all be metric i think? isn't there any fairly big hardware (not b&q or homebase ) shops near you at all?
Please; don't use hardware bolts for such fastenings, proper bolts or at least grade 8 or better with the proper shank length.
Most are likely to be a U.N.C. thread Burtonpower are a good source of Crossflow parts
Will give burton a try
Tried buron's, not very helpfull, told me to go to loval hardware store, no sizes, lengths, what grade of steel to ask for nothing, even though they list some of the bolts in their catalogue. Not using them in the future if I want anything, appaling service.
The two bolts at the top that screw into the block are UNC, the others that screw into the gearbox are metric.
Shaun
contact gs escorts in widnes and they will supply all the correct bolts to you for not a lot of money
quote:
Originally posted by marcjagman
Tried buron's, not very helpfull, told me to go to loval hardware store, no sizes, lengths, what grade of steel to ask for nothing, even though they list some of the bolts in their catalogue. Not using them in the future if I want anything, appaling service.