I was put onto this on another forum.
Ripspeed (what I reckon must be stainless) diamond mesh down from £30 to £10, enough to do 2, or enough to cock one up and still have enough to get it
right
Very tough to cut, and according to others who've used it it doesn't rust, even on the cut ends.
Link to mesh at Halfords
If that doesn't work, search the Halfords site for "Cat code: 379859-0"
Reserve to collect and it's £10 instead of £30 in store.
good shout
According the Halford's site it's coated steel?? Time will tell!
quote:
Originally posted by Bluemoon
According the Halford's site it's coated steel?? Time will tell!
Reserved online but they don't have any at my local shop when I went to pick up. Useless online reserver !!!
Anyone want to send me some ?
[Edited on 25/5/12 by Ben_Copeland]
quote:
Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
They are a tenner instore too, just picked one up.
quote:
Originally posted by Mr C
quote:
Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
You can buy online and the mesh will be sent to your local store on monday.
I've had that on mine for 4 years and it's still like new.
quote:
Originally posted by Ben_Copeland
quote:
Originally posted by Mr C
quote:
Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
You can buy online and the mesh will be sent to your local store on monday.
No you cant, as they are out of stock online
They are out of stock, they just dont have anyone on at the weekend to email saying they are out of stock as its been discontinued. Spoke to head
office and they confirmed theres none left.
You can order it online for collection etc, but they dont actually have any.
quote:
Originally posted by Mr C
quote:
Originally posted by Ben_Copeland
quote:
Originally posted by Mr C
quote:
Originally posted by Ben_Copeland
Reserved online but they don't have any at my local shop when I went to pick up. Unless online reserver !!!
Anyone want to send me some ?
You can buy online and the mesh will be sent to your local store on monday.
No you cant, as they are out of stock online
Not sure what you are doing Ben, This morning I've just ordered two for collection Monday from the Maidstone store. I checked that this service is available to the Margate store, which it is.
Same experience with me. Ordered on line and apparently in stock. Took credit card payment then got another e-mail a couple of days later saying
that it was not actually in stock and that they were going to refund my payment (but presumably not the cost of the petrol to go and get it when I got
an e-mail between the two saying that it was ready for collection
What a way to run a business. I did see a good set of rachet spanners whilst I was there but I refused to buy them and will not be going back again
unless its a last resort
must have been really lucky as I got mine ok, reserve for collection, email saying it was there, would be held 24 hours, and I collected it at hour
30, still waiting for me.
nice stuff too.
quote:
Originally posted by SteveWallace
Same experience with me. Ordered on line and apparently in stock. Took credit card payment then got another e-mail a couple of days later saying that it was not actually in stock and that they were going to refund my payment (but presumably not the cost of the petrol to go and get it when I got an e-mail between the two saying that it was ready for collection
What a way to run a business. I did see a good set of rachet spanners whilst I was there but I refused to buy them and will not be going back again unless its a last resort
I have a sheet of this stuff which I didn't use. £5.00 + postage or collect North London.
Just reserved mine from the pontefract store , got until friday to pick it up , they better have it in stock when i get there
I ordered a sheet on tuesday, and by today (Friday) it hasnt arrived.
After a lengthy phone call the £10 price was to clear old obsolete stock.
Bugger, could have done with some for this weekend.
I used the same stuff on mine, its been on the cone since i put the zetec in and changed the rad (polo) so thats 5 years, still in good shape.
I got lucky and pulled a sheet of it out of the bargain bucket for £2, it was bent on one corner and the packet had been opened so bargain.
Picked up my mesh from halfords this afternoon , looks good quality .
quote:
Originally posted by Macbeast
I have a sheet of this stuff which I didn't use. £5.00 + postage or collect North London.