Hi all.

I got the MNR drum to disc adaptor plates and later I discovered some very nice refurbished
calipers in the midle of all the stuff I bought from MNR (yes.. I paid them
later as it was not supposed to be there )

The center to center of the holes in the
* adaptor plate: 9cm
* caliper: 12cm

Which calipers are these? Sierra?
What does use the 9cm spacing? VW Golf? Pug 205?

Thanks for all your help,
Joao

...
Rescued attachment 06-05-19_23-10.jpg

They dont look like my Sierra calipers?

Have you got a better picture?

quote:

---

Originally posted by muzchap
They dont look like my Sierra calipers?

---

I agree... very bad angle... it was just to compare the holes in both calipers and plate.

Here a couple more








Thanks for all your help,
Joao

[Edited on 06/5/20 by JoaoCaldeira]

[Edited on 06/5/20 by JoaoCaldeira]

IIRC, it is a rear Sierra one, but you're missing the small slider bracket like the ones on the fronts.

Pat...

quote:

---

Originally posted by Avoneer
IIRC, it is a rear Sierra one, but you're missing the small slider bracket like the ones on the fronts.

Pat...

---

As both above. Sierra one with missing slider.

Thank you all very much

Joao

As far as I know all recon calipers don't come with the carrier as in your case.

yea i had this problem when i got my refurbed ones, so marc gave me a set of sliders, ive just been to scrappy and got another set to give to him as a replacement!!

plus you will need the slider pins- i bought from ford at a astonishing £8 each (x4)

hi jaoa we have just had a load of sliders back from the powdercoaters if you want a pair let me know asap then they can come with the uprights etc

best regards

marc