Hiya,

Wonder if anyone has a K Jetronic system or knows the plumbing on one. I have one of a V6 Cologne engine and I have most likely got some of the hoses misplaced. All the injectors are connected correctly, it's the pipes running to the Cold Start Injectors / Warm up regulator etc that I have buggered up.
So if anyone knows how I can plumb one of these up that would be great.
Thanks in advance
Nige

I've got a 4i as my daily driver - I pressume you hav'nt got the sierra v6 manual and as a picture says as thousand words -

(Click to Enlarge)



CLICKY CLICKY

(20) Warm Up Regulator
(22) Auxilary Air Device
(24) Heater Feed Hose
(35) Fuel Start Valve

Am back up working on the old girl tomorrow morning so will note down where the ins/outs on the metering unit for the warm up reg and the fuel start valve are. Sure the return feed from the warm up regulator goes onto the centre banjo on the fuel distributor.

Will clarify tomorrow


Cheers

G

[Edited on 6/11/08 by Mr G]

Looking down onto the metering unit from the front the connections are as follows :

(On the side of the unit closest to the engine)

Warm up regulator (Left) ----------o
Fuel return to tank -------------------O

Double banjo from single outlet- oO
Feed to Fuel Start valve _______l l
Main Fuel feed from filter _______l

The connector in the centre of the metering unit goes to the Warm up regulator (Right) connector.

Side view of metering unit-



CLICKY

[Edited on 7/11/08 by Mr G]

Mr G,

Many thanks for the pickies and scans. Should be allowed to play again tomorrow afternoon so hopefully will get the bloody thing started.

Nige