Now I have my ZX12r from Malc I am considering selling my Megasquirt (extra) system.

What is worth ?


MS 1 Version setup for my RF900 Fuel only.
Has some upgrades from the later Ver 3 PCB added.
Running MSextra.
MS Relay PCB

GSXR600K1 individual throttles bodies.
38mm with 240cc hi impeadence injectors.
(40mm tapering to 38mm)
Center spaced for RF900. 80mm-93mm-80mm.
2 sets of GSXR600 inlet rubbers (4 long , 4 short)
GSXR600 Air temp Sensor.

Servo secondry butterflies removed and blocked with machine spacers.
Machined 'D' fuel rail.

plus loads on data including GSXR600 CD manual.

Oooh, very interested indeed....
although I wouldn't like to guess the total worth.
What sort of ballpark figure are you after?

A quick guess and looking at ebay.

MS 1 V2.2 Extra vary from approx £120 - £200
Relay PCB £50 ish
Throttle bodies. Can't find any < £100 I thought £70 ish.

2 years expirience priceless

I would prefere to sell a a job lot.

which would include a few other small parts/data I collected along the way.

Other wise it may go to the dreaded Ebay

Martin


Looking at ebay etc. I guess £300 for every thing would be near the mark.

Plus I have a EDIS 4 which I would include (cant use on a BEC rev limit to low), plus any other related bits I can find.

And for that price I would be willing to give some tech help.


[Edited on 23/1/09 by rf900rush]

Given that a set of jenveys and omex would be around the 2 grand mark and a pair of webbers is around the 600 quid mark plus a 150 quid manifold linkage etc etc.
Then if it's a working system with all the bits and bobs to match I suppose IMHO around about £350 to £450 would be attainable on ebay if the bidders were interested enough.

Depends what you're happy with I suppose. Megasquirt being an unknown quantity to many, and the many many ways of setting it up for differing applications,means you'd need to find a couple of bidders in the know or place a reserve or take your chances.

Hi Martin, you have U2U